Announcement

Collapse
No announcement yet.

Plum Crazy 1974 Challenger Mopar

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    I made a jumper and jumped the orange side of the fuse to the radio power. Guess what, the lights worked. So this leaves 2 conclusions.

    Either the tan wire is bad from the rheostat harness to the fuse block and must be traced and repaired.
    Or
    The rheostat is bad.

    So next step is to take the dash back apart and continuity check the tan wire.
    Originally posted by Yoshi94
    Mines about an inch bigger than Kyles. I need to get one of those
    Originally posted by ryanwarby01
    Put it this way, if you have a money tree a LT1 is a wood chipper!
    sigpic

    Comment


    • #17
      Originally posted by Fox Slaughter View Post
      Must be nice to have money
      Ready to be mad? He paid $6000 for that car.
      -Joel
      1995 Z28 M6 - AI226/234 - autocross ricer
      1984 Scottsdale K10 - 305/4bbl/4spd


      WTB List:Midwest Chasis DS Loop

      Comment


      • #18
        Joel, I will be over in 5 mins to punch you in the throat. That is all.

        Also the round ball shifter like I have apparently is factory slap stick.
        Originally posted by Yoshi94
        Mines about an inch bigger than Kyles. I need to get one of those
        Originally posted by ryanwarby01
        Put it this way, if you have a money tree a LT1 is a wood chipper!
        sigpic

        Comment


        • #19
          Tried it yet? Curious how they work. My cousins 727 in his coronet was fun to shift manually with the standard console shifter.
          -Joel
          1995 Z28 M6 - AI226/234 - autocross ricer
          1984 Scottsdale K10 - 305/4bbl/4spd


          WTB List:Midwest Chasis DS Loop

          Comment


          • #20
            I tried it yesterday. Before all the fancy electronic transmissions when you put a trans like the 727 or TH350/400 into 1st its in first and will not shift out of first.
            So you put it down to first, then when you wanna shift slap the stick forward.

            Its pretty much like doing it on the column but you don't have to put the shifter towards you then go up and you could pass the next gear. This will slap up one and stop, till you slap it again.
            Originally posted by Yoshi94
            Mines about an inch bigger than Kyles. I need to get one of those
            Originally posted by ryanwarby01
            Put it this way, if you have a money tree a LT1 is a wood chipper!
            sigpic

            Comment


            • #21
              Love the color! Looks good.

              Coworker has a 68 Charger with a 440. Just had a lifter collapse on him. Luckily the cam was still good.
              2002 Z28 Camaro A4
              1993 Z28 Camaro M6- SOLD
              1999 Z28 Camaro M6- SOLD
              2008 Ford Fusion SE - DD
              -- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
              sigpic

              Comment


              • #22
                Looks good. FYI, "right" and "left" are always viewed as if you are sitting in the drivers seat.
                2015 Silverado

                Originally posted by JoeliusZ28
                If you need 6 and half grand to break your tires loose you shouldnt be attempting a holeshot.

                Comment


                • #23
                  Originally posted by Boost Addict View Post
                  Looks good. FYI, "right" and "left" are always viewed as if you are sitting in the drivers seat.
                  I know that silly man you!
                  [MENTION=1504]mcalus[/MENTION] Do you just do paint or do body work to?
                  Last edited by Fox Slaughter; June 8th, 2014, 07:31 PM.
                  Originally posted by Yoshi94
                  Mines about an inch bigger than Kyles. I need to get one of those
                  Originally posted by ryanwarby01
                  Put it this way, if you have a money tree a LT1 is a wood chipper!
                  sigpic

                  Comment


                  • #24
                    I do paint work more than body.
                    2002 Z28 Camaro A4
                    1993 Z28 Camaro M6- SOLD
                    1999 Z28 Camaro M6- SOLD
                    2008 Ford Fusion SE - DD
                    -- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
                    sigpic

                    Comment


                    • #25
                      if you run into any issues you can't fix...

                      2000 SS Convertible #1414 - Light Pewter 6 Speed

                      Comment


                      • #26
                        Originally posted by Atrus View Post
                        if you run into any issues you can't fix...

                        Reference doesn't work for me because I don't know what that is.

                        Today some chunk of aluminum showed up on my door step.

                        10402759_10203265733660655_4636367524636319154_n.jpg
                        Originally posted by Yoshi94
                        Mines about an inch bigger than Kyles. I need to get one of those
                        Originally posted by ryanwarby01
                        Put it this way, if you have a money tree a LT1 is a wood chipper!
                        sigpic

                        Comment


                        • #27
                          Make sure you have a good clutch fan, a fan shroud, and the seal that attaches to the hood is in place.
                          When in doubt, Whip it out !

                          Comment


                          • #28
                            Originally posted by Atrus View Post
                            if you run into any issues you can't fix...

                            hhahahaha, one of the best car related programs on TV.
                            Im surprised he can even walk, you'd think 100% of brain is devoted to mopar part numbers and PN Codes.
                            1997 Trans Am
                            T56 swap. LS1 Cosmetics

                            Comment


                            • #29
                              Looking forward to seeing this car. You got the right color

                              Comment


                              • #30
                                I vote for keeping the 340, then 6-pack it! keep the front end light.
                                sigpicMODS: SLP DUAL/DUAL EXHAUST, 160 STAT, MTI LID, SHANER S3 T.B., SMOOTH BELLOWS, DESCREENED MAF, TUNNEL BRACE, UMI SFC & PHB, STRANO SWAY BARS, DRILLED/SLOTTED ROTORS, WHISTLER LIGHTS, BLACK BILLET GRILLE w/69'SS EMBLEM, BLACK SMOOTHED TAIL PANEL w/69'SS EMBLEM, BLACK SS HOOD INSERT, INTIMIDATOR SS WHEELS.

                                Comment

                                Working...
                                X