Plum Crazy 1974 Challenger Mopar

[Darren]

Saw the car yesterday! Very nice pick up TJ, get that alignment and she is a great cruiser.

[Fox Slaughter]

Well I got the alignment pretty damn close myself. Just a little squeal when making left turns fast.
But I can let go of the steering wheel and go straight.
[MENTION=1993]Darren[/MENTION] and I were cruising last night and the tire was squealing in a straight line so we pulled over and looked and the fuel line cracked right at the pump and was pouring gas. So we ended up at Meijer buying some tools and clamps and fixed it in the parking lot then continued to cruise haha.

[Darren]

You use that term "we" loosely there! I guys by we you mean you paid I worked!


Sent from my iPhone 5 on iOS7 using Tapatalk

[Fox Slaughter]

You gotta be worth something.

Roseville cruise sucks. Not a lot of cars out, cops everywhere.

[meissen]

Saw you pull into Ducati last night but didn't get out. Car looked good

[Fox Slaughter]

Well put a set of Infinity Primus 6x9s in the rear deck.
Got the hood better aligned still sits high on driver side front. You can push it down flush. Don't know if the hood is bent a little.
Ordered Camber bolt bushings and bolts.
Hopefully can get a legit front end alignment and it holds, cause my hillbilly alignment isn't holding so new bolts and bushings.
Probably have [MENTION=1993]Darren[/MENTION] powder coat the upper A arms when they are out.

[ruckusz28]

Purple suspension. Do it

[Fox Slaughter]

Purple suspension. Do it

I already called him and told him I plan on doing the suspension parts in Plum Crazy. Haha

[ruckusz28]

You're the man

[Fox Slaughter]

I think a 500hp/600ft 440 will be enough for this cruiser. Oops I've said to much.

[TRY MEH]

very nice ride man!!!
i have quite a bit of 440's not sure of pricing yet but id have to talk to my brother about them if we can see what needs to go
my dad had way to many mopar parts "he passed away =("

ill be restoring a 70's plum challenger thats been sitting for years when i get the time and money (its in really rough shape)

[Fox Slaughter]

Tubular A arms are in for the Challenger.
We aren't going to talk about why I am replacing the upper A arms...

[Darren]

Tubular A arms are in for the Challenger.
We aren't going to talk about why I am replacing the upper A arms...

Must not have done any work didn't see this pig on Woodward.

[Fox Slaughter]

Yeah Ive been doing work. It's called keeping people's power on. You work 32 hours in 2 days and tell me where you find time to work on your car.

Storm number is down and 16/8 is down so I'll be off after 10 today and tomorrow and will try to get it done.

[Fox Slaughter]

New A Arms are installed in the Challenger. Drives like a champ. No tire squealing no clunking noises. Its beautiful.