DRYSUMP's Yet Another Restoration Project...Project

[WMCCjames]

Killer job Kolin!

[OIF1VET]

Awesome!

[DRYSUMP]

Really not trying to be like Brent but........ ran into an injector issue... DTC po200 which is an issue with the injector driver circuit ssssoooo I have to chase that down.... really wanted to drive this damn thing today/tomorrow

[alone_and_insane]

Amazing.

[JoeliusZ28]

This is something I really really really wish I would have kept track of. But a rough estimate, with multiple people working on it at any given time... I would say 300 hours... conservatively

I dont doubt that at all. I estimated 80-120 on mine and i hardly did anything compared to you.

Sucks about the injector issue...

[meissen]

I did a quick google for the DTC code and found a thread on LS1tech that talked about the code ( http://ls1tech.com/forums/fueling-in...r-circuit.html ) -- the OP said he actually realized one of his O2 sensors wasn't reading so he replaced the O2 and that fixed it?

[JoeliusZ28]

I did a quick google for the DTC code and found a thread on LS1tech that talked about the code ( http://ls1tech.com/forums/fueling-in...r-circuit.html ) -- the OP said he actually realized one of his O2 sensors wasn't reading so he replaced the O2 and that fixed it?

IIRC kolin had brand new headers. Was the coating heat cycled before the O2s were installed? New coating is known to kill o2s

[DRYSUMP]

O2s are fine. It's an issue with the #6 injector so hopefully I can fix it during lunch....fingers crossed.... and to be honest on my hours estimate, I'm really thinking thats on the low end and short of at least 100 hours lol

[DRYSUMP]

Injector is fixed

[kammi10]

Injector is fixed

and what fixed it

[DRYSUMP]

and what fixed it

Pin came out of the injector adapter

[meissen]

Awesome - that was a quick fix.

[OIF1VET]

Love quick fixes...

[c0ncEpT]

This car stinks up the shop something fierce...

[DRYSUMP]

This car stinks up the shop something fierce...

Shes a little rich...