ls1 blazer

[t_ank]

no i got them off my buddy but he got them for his iroc.

in these pic the front is on the rear i was seeing how i liked it.

the rears have 7in backspacing they wont fit on the right now but will fit good with the 8.8 the 8.8 isnt in yet still looking to find someone to drill my axles

I thought 8.8 Exploder rears were 5" wider than 2wd S10/15 rears?

The offsets look different, are the 11" high offset and the 9.5" low?? If so, it will actually work...but I think it would look a little funny.

On a side note, did you get the wheels from a guy named Brad? I think he ran that setup on his Iroc when he switched to a 4th gen rear

[hoogiesngrinderz]

Find a competent machine shop that's local. Or, call Moser. They will be happy to sell you new axles with 4.75" bp

[t_ank]

i dont need 4.75 bp

with the 8.8 i have to run 7in bp

everything all good

Find a competent machine shop that's local. Or, call Moser. They will be happy to sell you new axles with 4.75" bp

[hoogiesngrinderz]

bp = bolt pattern
bs = back space

[t_ank]

lol idk what i was thinking i confused myself

i think i found a place to do it im gonna call tmr

if i cant find what im looking for ill look for a 8.5 4x4 s10 axle be bolt and play

bp = bolt pattern
bs = back space

[t_ank]

rears mocked up on 8.8 =)

[1bad83ta]

Travis try A&A Machine shop in Davison. They might be able to do the axles.

[hoogiesngrinderz]

what are you going to do for brakes?

[t_ank]

ll call a&a tmr morning thanks

im going to run ford disc brakes for now these winter i will be putting ls1 caliper all the way around

[t_ank]

noone else could do my axles so i emailed MOSER!


they said $65 bucks mailing them out tonight or in the am. hope to have them back next week.

[t_ank]

did a little tinkering with the front end yesterday and got it to sit lower in the front. going to order my blocks for the rear tonight to get it down another inch. 002.JPG001.JPG003.JPG

going to a few junkyards to find these headlights and grill

[hoogiesngrinderz]

Out of curiosity, how did you get it to drop in the front?

[t_ank]

well it already had 2in drop spindles and i was curious to see what drop coils it had so i tore it down. i found out i had 3in drop coils and was curious why my truck wasnt sitting as low as the ones i see online with that drop. well it had a 1in spacer hidden up in the coil pocket. i pulled that out and index the coils properly they settled in to place and BAM finally have my 5in drop in the front.

so now im going to order 2indrop blocks to lower my ass down another inch

Out of curiosity, how did you get it to drop in the front?

[Darren]

call me crazy but I love those wheels!

[t_ank]

what wheels

call me crazy but I love those wheels!