Project White Out 2011

[bigjon88]

sooo where this big summit order you did?? that you saved like 100$ on fail no pictures nothing!!!

[Gregs_gsxr]

sooo where this big summit order you did?? that you saved like 100$ on fail no pictures nothing!!!

I posted pics, go back and take a look

[Gregs_gsxr]

so I tried to get the k member out, 4 bolts are out, I left two in but they are broke loose. I tried renting a spring compressor to safely get the springs out and guess what no f'n luck. So what should I do ?

[Iroc'nthe87]

kick it down

[Gregs_gsxr]

I thought about cutting them out.

[bigjon88]

Put a jack under the springs and slowly lower it down

[bigjon88]

Also auto rents a spring compressor

[Gregs_gsxr]

dont want to try the jack thing, cause there is no weight in the car, and nothing from springing the front end up after I undo the strut from spindle

[Darren]

cut them

[Gregs_gsxr]

cut them

ok you come cut them.... thats a lot of spring still under pressure, I have seen these bust through block walls

[Darren]

ok you come cut them.... thats a lot of spring still under pressure, I have seen these bust through block walls

I'd cut them, wouldnt be the first time.

[Gregs_gsxr]

come over on sunday and I'll buy beer

[theculprit]

autozone oreilly and advance all rent spring compressors and its free after u bring it back... that or do the jack thing ive done that before just dont stand in front of it... get one of your "buddies" to lower it out

[Gregs_gsxr]

Yea I tried renting the coil spring compressor and after you screw it down to compress the spring it bottoms out at the top of the K member and wont let me tighten it any more

[bigjon88]

Man I'll come lower them Out with a jack it ain't no biggie