Announcement

Collapse
No announcement yet.

Project White Out 2011

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by bigjon88 View Post
    Orange
    orange valve covers ? or orange block?
    '91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components

    " When in doubt...throttle out ! "
    ENVYsion Entertainment Group

    Comment


    • orange block, shine up the heads and clear them, and white valve covers?
      91 Trans am, 305, Lt1 cam, 24lb injectors, headers, SLP LM2, SW chassis, massive panhard, lowered, modded TPI, Tuned, 4.10s, Lincoln locked
      85 Z28 406/th400?/3.42 4th gen disc rear/4th gen dash
      00 Tahoe Z71........Stock
      97 K1500 lt4 cam, 1.6s, MPFI, Solid axled, IROKs,------winter beater

      Comment


      • i have stock steel heads, so I would paint them the same color as the block. anyone seen a white block ?
        '91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components

        " When in doubt...throttle out ! "
        ENVYsion Entertainment Group

        Comment


        • project white out indeed
          Makin Torque.

          Comment


          • i have some tricks in the bag... but everyone is gonna have to wait to see or even notice them
            '91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components

            " When in doubt...throttle out ! "
            ENVYsion Entertainment Group

            Comment


            • white block would look nice, http://www.thirdgen.org/techboard/at...-motor-pic.jpg , thats in a thirdgen camaro i believe didnt look close, but its a thirdgen none the less
              91 Trans am, 305, Lt1 cam, 24lb injectors, headers, SLP LM2, SW chassis, massive panhard, lowered, modded TPI, Tuned, 4.10s, Lincoln locked
              85 Z28 406/th400?/3.42 4th gen disc rear/4th gen dash
              00 Tahoe Z71........Stock
              97 K1500 lt4 cam, 1.6s, MPFI, Solid axled, IROKs,------winter beater

              Comment


              • Originally posted by TylerT/AZ28 View Post
                white block would look nice, http://www.thirdgen.org/techboard/at...-motor-pic.jpg , thats in a thirdgen camaro i believe didnt look close, but its a thirdgen none the less

                its a 3rd gen, which actually looks sweet, but I wouldnt do it fast like that guy did, block, head and valve covers would be white, intake would be polished, pulleys polished, everything else a matte black
                '91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components

                " When in doubt...throttle out ! "
                ENVYsion Entertainment Group

                Comment


                • yeah it looks like he just taped a few things off and took the can, sprayed it everywhere and called it a day, when you said all white block i knew i say a pic of one and some other odd colors on thirdgen.org so i looked it up for you, and there ya go
                  91 Trans am, 305, Lt1 cam, 24lb injectors, headers, SLP LM2, SW chassis, massive panhard, lowered, modded TPI, Tuned, 4.10s, Lincoln locked
                  85 Z28 406/th400?/3.42 4th gen disc rear/4th gen dash
                  00 Tahoe Z71........Stock
                  97 K1500 lt4 cam, 1.6s, MPFI, Solid axled, IROKs,------winter beater

                  Comment


                  • I would strongly recommend against white for an engine color. It will look very grungy within a year. The white will stain and discolor from hot oil leaking on it.
                    sigpic
                    Turbo Charged LS1/T56

                    Comment


                    • Originally posted by WMCCjames View Post
                      I would strongly recommend against white for an engine color. It will look very grungy within a year. The white will stain and discolor from hot oil leaking on it.
                      x10!!!




                      Comment


                      • I would like something else then the standard
                        '91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components

                        " When in doubt...throttle out ! "
                        ENVYsion Entertainment Group

                        Comment


                        • Originally posted by Gregs_gsxr View Post
                          I would like something else then the standard
                          yellow, hot pink, lime green, brown, purple, those arent standard
                          91 Trans am, 305, Lt1 cam, 24lb injectors, headers, SLP LM2, SW chassis, massive panhard, lowered, modded TPI, Tuned, 4.10s, Lincoln locked
                          85 Z28 406/th400?/3.42 4th gen disc rear/4th gen dash
                          00 Tahoe Z71........Stock
                          97 K1500 lt4 cam, 1.6s, MPFI, Solid axled, IROKs,------winter beater

                          Comment


                          • I guess its gonna be black with white valve covers
                            '91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components

                            " When in doubt...throttle out ! "
                            ENVYsion Entertainment Group

                            Comment


                            • Black is good. Hides the oil leaks until you pull away from your parking spot. LOL. You're in the same spot I am!
                              -08 G8 GT DD: Rotofab CAI, HID's, Breyton Race GTS'
                              -86 Iroc Project: LQ4, Th400, S400, Ford 9"

                              Comment


                              • haha I sure hope mine doesnt leak any oil after the rebuild...Im thinking black block,heads, water pump, valve covers are white, intake is polished thats it until I start putting it all back together.
                                '91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components

                                " When in doubt...throttle out ! "
                                ENVYsion Entertainment Group

                                Comment

                                Working...
                                X