After all the begging for pics, now that I finally posted some, everyone is speechless? I must have done good. . .
The car is in better shape than I originally thought, it won't take much to get it in shape for the Meet and Greet (how can I NOT go now?!).
More pics to come as we get more work done, I still need to knock the left side rocker down a bit, then we'll be working on the right side quarter panel while we're waiting for the new outer rocker to arrive. I pulled the P.O.'s stereo out and got my in-dash 7" touchscreen Pioneer DVD unit mocked up and working, now I just need to make some sturdier mounts and get started modifying the stock bezel to fit. If I raise the headunit up a little more, I'll just have to cut a notch out of the bottom of the bezel and fill in the gaps on the sides to make it look good. Shouldn't take much work. After this is done, we'll be getting ready to start wiring up the amp and subs from the 'bird in the Camaro, and come spring, I should be able to get the headers and other goodies put in.
I'm thinking x-piped true duals dumped before the axle as far as exhaust goes, then a few personal touches here and there to get it looking a little less "stock".
We were out driving today, and I noticed the car hesitates a lot after 1/2 throttle when it's warmed up, I'm thinking the exhaust leak has caused an O2 sensor to go bad. It'll be getting new plugs, wires, and an oil change soon as well, that should help clear up the misfire/hesitation.
I still can't believe what I was missing all these years. . .
The car is in better shape than I originally thought, it won't take much to get it in shape for the Meet and Greet (how can I NOT go now?!).
More pics to come as we get more work done, I still need to knock the left side rocker down a bit, then we'll be working on the right side quarter panel while we're waiting for the new outer rocker to arrive. I pulled the P.O.'s stereo out and got my in-dash 7" touchscreen Pioneer DVD unit mocked up and working, now I just need to make some sturdier mounts and get started modifying the stock bezel to fit. If I raise the headunit up a little more, I'll just have to cut a notch out of the bottom of the bezel and fill in the gaps on the sides to make it look good. Shouldn't take much work. After this is done, we'll be getting ready to start wiring up the amp and subs from the 'bird in the Camaro, and come spring, I should be able to get the headers and other goodies put in.
I'm thinking x-piped true duals dumped before the axle as far as exhaust goes, then a few personal touches here and there to get it looking a little less "stock".
We were out driving today, and I noticed the car hesitates a lot after 1/2 throttle when it's warmed up, I'm thinking the exhaust leak has caused an O2 sensor to go bad. It'll be getting new plugs, wires, and an oil change soon as well, that should help clear up the misfire/hesitation.
I still can't believe what I was missing all these years. . .











Comment