Tweet
Well, since everyone else is doing it, I thought I'd join in too! After about a year of just enjoying the car and finishing up school (while skipping most all car shows of 2010), the time has come where I have a full time job and the means to make some customizations. Most of you have seen my car in the past, and I really haven't changed much on it. For now, most mods I'm going to do will be cosmetic, and I'm open to suggestions!
As it sits:
Exterior Modifications:
-Blackbird stripes
-Black "pontiac" rear fillins and black emblem overlays
-Stainless Fuse Box, PCM, Battery, Oil Filler Cap, Brake Fluid Cap, Power Steering Cap, Radiator Cap, and Head Plate.
-Corvette Fuel Rail Covers
Interior Modifications:
-Custom "Trans Am" Embroidered Headrests.
-Shifter w/ Chrome Button
-Chrome Vent Rings by Boyd.
Performance Modifications:
-BG Ram Air Kit
-HP Tuners
-SLP lid
-Ported and Modified Throttle Body
-Hypertech 160 Thermostat
-Stainless Longtubes and ORY
-Drilled and slotted rotors
-Stainless Magnaflow Exhaust
-QTP 3" Electric Cutout
-K&N
-!Air
-!EGR
Suspension/Chassis:
-Hotchkis Panhard Bar
-Poly Engine Mounts
-BMR Tunnel Brace/Driveshaft Safety Loop
-UMI LCA Relocation Brackets
-Founders Adjustable Tubular Lower Control Arms
-SLP Strut Tower Brace
What the future holds:
-Sequential Taillights
-Fix the infamous sail panel bubbles, the rest of the car is mint, but the bubbles are coming up and they need to go!
-Paint any factory black pieces in the undercarriage with black undercoat (The car is from Georgia so there is no rust, but it would be nice to freshen it all up).
-Clean and wax the entire undercarriage again-the e-cutout has made some of it dirty!
-Polish the entire stainless exhaust system.
-Grind down and polish calipers
-Buy stainless FRC strips to cover the corvette letters (then add "trans am letters on top of the strips)
-Gut the entire interior and sound deaden it all.
-Some sort of polished wheel setup with some sticky tires, 17s or 18s.
-Add some sort of sub/amp setup with custom box and Amp Rack.
-Triple gauge pod
-Gears and Stall?
Any other suggestions?
In Process/Recently Complete
-Polish MAF Housing
-Buy MTI Clear Lid
-Add aux input jack to factory headunit
Below are some pics of the car as it sits, I am open to any input/suggestions!
As it sits:
Exterior Modifications:
-Blackbird stripes
-Black "pontiac" rear fillins and black emblem overlays
-Stainless Fuse Box, PCM, Battery, Oil Filler Cap, Brake Fluid Cap, Power Steering Cap, Radiator Cap, and Head Plate.
-Corvette Fuel Rail Covers
Interior Modifications:
-Custom "Trans Am" Embroidered Headrests.
-Shifter w/ Chrome Button
-Chrome Vent Rings by Boyd.
Performance Modifications:
-BG Ram Air Kit
-HP Tuners
-SLP lid
-Ported and Modified Throttle Body
-Hypertech 160 Thermostat
-Stainless Longtubes and ORY
-Drilled and slotted rotors
-Stainless Magnaflow Exhaust
-QTP 3" Electric Cutout
-K&N
-!Air
-!EGR
Suspension/Chassis:
-Hotchkis Panhard Bar
-Poly Engine Mounts
-BMR Tunnel Brace/Driveshaft Safety Loop
-UMI LCA Relocation Brackets
-Founders Adjustable Tubular Lower Control Arms
-SLP Strut Tower Brace
What the future holds:
-Sequential Taillights
-Fix the infamous sail panel bubbles, the rest of the car is mint, but the bubbles are coming up and they need to go!
-Paint any factory black pieces in the undercarriage with black undercoat (The car is from Georgia so there is no rust, but it would be nice to freshen it all up).
-Clean and wax the entire undercarriage again-the e-cutout has made some of it dirty!
-Polish the entire stainless exhaust system.
-Grind down and polish calipers
-Buy stainless FRC strips to cover the corvette letters (then add "trans am letters on top of the strips)
-Gut the entire interior and sound deaden it all.
-Some sort of polished wheel setup with some sticky tires, 17s or 18s.
-Add some sort of sub/amp setup with custom box and Amp Rack.
-Triple gauge pod
-Gears and Stall?
Any other suggestions?
In Process/Recently Complete
-Polish MAF Housing
-Buy MTI Clear Lid
-Add aux input jack to factory headunit
Below are some pics of the car as it sits, I am open to any input/suggestions!
Comment