Welcome to the Michigan FBody Association website.
The Michigan FBody Association is a centralized website for FBody enthusiasts to discuss what's going on in the Michigan area. MiFbody.com was created to allow for an easy one-stop place to find out what's going on in Michigan as far as FBody events, to find out what clubs are available in your immediate area, and for an easy place to post classifieds for items you want to sell! Our goal was to create a more close-knit community of FBody enthusiasts in the state of Michigan, and to bring Camaro and Firebird enthusiasts alike together for some amazing FBody events!
The most important thing to know about the Michigan FBody Association is that we are NOT a club! The Michigan FBody Association is open to everyone, and is a community. Thus, we will have get togethers, casual cruises, events, and such like that, but this is not an exclusive club and it's 100% free to join this site! So what are you waiting for? Register now!
If you have any problems with the registration process or your account login, please contact us!
That car has always been one of my favorite builds! Guy is in michigan too, but ive never seen the car around anywhere.
Ya it's a 1000rwhp lt1 now lol! and don't hold me to it, but im pretty sure he is actually out of northern ohio, and races and norwalk quite a bit. The video does show him at stanton though
And fox slaughter! buy some rust prevenative paint called chassis saver... it stays on FOREVER! ill post some pics of mine when i get a chance, i also sprayed my neighbors 442 olds yesterday and it turned out beautiful... stuff i wicked and never comes off. i paid 125 for a gallon of it and did 2 cars
This is the stuff i was talking about.... rattle can paint will go on easy and come off in a matter of a couple months especially if you got rust like i could see in your pics.... Just hammer the flaky stuff off with a needle scaler which is a 20 dollar tool from harbor freight and get a cheap spray gun and shoot this stuff on and it holds on like no ones buisness... I know a guy that put it on his 68 mustang like 8 or 9 years ago and it looks like the day he put it on. Just please make sure you wear a respirator, cause this stuff is bad bad stuff! you can either buy some thinner for it and put two thin coats on or just leave it the way it is (its very thick in the bottle) and put 1 heavy coat on. i did my car front to back and the engine bay, then i'm going to have a friend spray some single stage urethane quaser blue under the hood
It didn't even cross my mind until I got it out. I least thought it would have been painted :/
So I'll probably just shoot it myself. Doesn't have to be perfect its an axle not the body.
Originally posted by Yoshi94
Mines about an inch bigger than Kyles. I need to get one of those
Originally posted by ryanwarby01
Put it this way, if you have a money tree a LT1 is a wood chipper!
Joel is correct.
Its an S60.
4.10s.
Weld on LCA brackets.
S-Trac.
I'm kinda excited kinda not. Haha. I still have some things to finish before I can put her in.
Then the trans needs to come out to put the Bell Housing, engine plate, clutch in.
Still waiting on Torque Arm.
But yes overall excited haha. Shot the shit with the delivery dude for like 15 mins to haha.
Originally posted by Yoshi94
Mines about an inch bigger than Kyles. I need to get one of those
Originally posted by ryanwarby01
Put it this way, if you have a money tree a LT1 is a wood chipper!
If it disappears out of your garage this week it wasnt me
This is why I hired Dog the Bounty Hunter. He will track you down!
Joel you want a engine plate?
I didn't look through the box good enough the Quicktime came with one but I ordered a separate one.
If you want to buy it, saves me from returning it.
Originally posted by Yoshi94
Mines about an inch bigger than Kyles. I need to get one of those
Originally posted by ryanwarby01
Put it this way, if you have a money tree a LT1 is a wood chipper!
Tweet
357ci LT1, cammed, stalled, and driven. 
Comment