[Project] Purple People Eater!!

[white97z28]

Alright guys it took me a while to compile this and it will probably change a lot throughout my ownership of my 1994 Pearl Metallic Purple Z28 Camaro. This is the list of past installs and future plans for my Camaro. Enjoy lol

1. Black turn signals and side markers - $45 online – Installed
2. Poly Trans Mount - $20 – Installed
3. New Spark Plugs - Installed
4. New fog lights – Free - Installed
5. Intrax lowering Springs - $100 – Removed (might put back on)
   
6. Optima Yellow top Battery - $300 – Installed
7. Pioneer Radio – $400 – Installed
8. 96 Bose sub out of a Olds Aurora - Installed
9. SS wing – Used from Fred - Installed
10. SLP Air filters and cover plate - $71.75 - Installed
11. LED gauge light conversion and dome light – $71.00 Installed
12. 8000k HIDs heads and fogs - $75.99 – Installed
13. Gabrel Shocks and Struts - $250 - Installed
14. Stainless Long Tube Headers w/ y-pipe - $349.97 - Installed
    
15. Egr and Air Delete - $15 - Installed
16. UMI Drivesaft loop - $30 - Installed
17. 93-96 leather Seats - $50 - Installed
18. 3.73 Gears - got in sale of wheels - Installed
19. B&M Transpack - $75.95 - Installed
20. 3200 stall converter - $330 - Installed
21. Comp cams cc 305 - $110.00 - Installed
22. Crane Cams valve spring kit - $30 - Installed
23. Hardened 7.00" pushrods - $120 - Installed
24. Scorpion 1.6 Rockers -$330 - Installed
25. Ls7 lifters - $121 - Installed
26. ARP head Studs - $100 - Installed
27. Fel-pro engine Gasket set - $170.95 - Installed
28. Hoosier dot slicks - $10 - Installed

Winter mods...

1. Reinstall lowering springs
2. New Used K-frame -
3. New Window Motors -
4. Coil Spring Spacer - http://www.summitracing.com/parts/GLS-1306/
5. Shock Spacer - http://www.summitracing.com/parts/BMR-SA002/
6. Chrome 16" Firebird Abs wheels - $200
7. New 02 sensors -
8. Window Tint -
9. UMI Lower Control Arm Relocation Brackets - $89.99
10. New Rack and pinion -
11. 97+ Dash Conversion - Already have the center console and love it!
12. Poly Motor Mounts - http://www.summitracing.com/parts/PTP-7-508/
13. Finish up exhaust and have another muffler ran after the axle to quiet up the car its a little loud
14. Might delete a/c and get rid of the outer hvac- clean up engine bay
15. Might get these for the ABS wheels - http://www.summitracing.com/parts/MTT-3793R/

Future plans....

1. Harrwood 2.5 cowl hood -
2. Ls1 slp air lid -
3. Trans cooler? -
4. Sub Frame Conectors – $159.99 -
5. N2o Kit - Still researching -
6. Racetronix fuel pump kit - $249.99 -
7. 40# Injectors -
8. Eaton Detroit Locker - $569.95 -
9. UMI Chrome Moly Double Adjustable LCAs & Panhard Bar Kit - $393.99 -
10. UMI Tunnel Mounted Trq Arm - $498.99 -
11. UMI Road Race K-Member - $569.99 -
12. UMI Complete Adjustable Front A-Arm Kit - $637.99

[nascarnate326]

What was the process of the tint prescription?

[white97z28]

What was the process of the tint prescription?

I went to my buddy's eye doctor in flint and had a check up and when i went to leave i asked him if there was something he could write me for the tint on my car. And the nice thing is i only had to pay for the check up the tint prescription was free and my insurance covered the rest. But if you dont want to ever get in trouble with it you have to go to the secritary of state and make it all legal and junk that way all he has to do is run your plate.

[98blackbeauty]

#22. Stall -Ridding our sponser. great deals and great job.

[white97z28]

#22. Stall -Ridding our sponser. great deals and great job.

Thanks Larry I'll look into them.

[white97z28]

Update*
Got my slp intake today! Can't wait to paint it silver and get new filters. Thanks Joel!!

0106001856.jpg

[white97z28]

So my plan is to run a cam just like the cc 280xfi but i want to get a custom grind with 110 lsa (joel talked me into a tighter lsa than what the 280 comes with). Anyone have any specific places that are great for getting custom ground cams?

[DETROITMUSCLE]

most performance shops can have them ground but you'll probably be just as easy to call direct to comp, crane ect.

[BP_Z28]

Sounds like a good project. Im in saginaw time from time visiting my parents.. Wouldnt mind stopping by taking alook at the purple people eater

[white97z28]

Sounds like a good project. Im in saginaw time from time visiting my parents.. Wouldnt mind stopping by taking alook at the purple people eater

Yea man sure thing but shes all tucked away till snows gone so maybe when the snows gone we can meet up.

[MunsterZ28]

pmd

[white97z28]

So do you all think i should hack up my rear to fit the c6s or sell them for the grand there worth to help build the Camaro?
1201091250a.jpg1201091235b.jpgCIMG0539.jpgCIMG0540.jpg

[camarochick16]

I like the C6's.

[98blackbeauty]

very nice, your car needs the bling. just like mine.

[white97z28]

Me to i just dont know if i wanna beat in my rear iner fender and roll it just to get them to fit.