Sneak Peak: Superman09's 98-02 Turbo Kit

[Superman09]

Will have an update today!

[DETROITMUSCLE]

hell yeah waiting patiently

[Superman09]

hell yeah waiting patiently

me as well! For the delivery truck! haha

[DETROITMUSCLE]

ups is delivering to me as well today, coincidence or not

[Superman09]

Here is the kit! Everything is in polished stainless steel! Complete with the specific couplers and t-bolt clamps. Couplers in future kits will come black. Brackets included are to directly bolt up the 4" core FMIC (which will also be included, not shown in pictures), and brackets to relocate your alternator! Enjoy the pics, the kit is beautiful!













Hot Side! 2.5" crossover with flange for 38mm Wastegate, 3" Downpipe with 3" v-band flange and flange for the 38mm wastegate to route back into the exhaust.








Cold Side! Set out how it routes with the specific made couplers! Flange for 50mm Blow-off valve on the pipe to Throttle Body as well!









Brackets

[black99ss]

giggity!

[DETROITMUSCLE]

wow super clean Jonny

[Superman09]

Tore engine down today! Waiting for parts to come in. Have the 6.0l heads and Turbo cam going in!

[Gaspo]

sweet! when do you plan on having it on the road (i didnt read thru all 3 pages of comments) and whats your horsepower goals?

[Superman09]

sweet! when do you plan on having it on the road (i didnt read thru all 3 pages of comments) and whats your horsepower goals?

It should be ready to go here less a trans and fuel system in the next few weeks. No specific power goals but should run very well. Power will depend on what trans the owner decides to run.

[MunsterZ28]

do one for an lt1 and i got a car for you

[Superman09]

do one for an lt1 and i got a car for you

You can use this, just need to make manifolds to mate into the crossover!

[Superman09]

I think I have figure out a way to easily add an upgradeable option to this kit! It would be to run a 44mm v-banded wastegate and 4" downpipe.

Taking the hotside, I would fab up an adaptor flange off the 38mm WG flange that converts it to the 44mm WG flange. Then on the 4" downpipe, simply use a 44mm WG flange and move it down on the downpipe the distance of the adaptor flange so it will bolt right up!

[DETROITMUSCLE]

lets put it into action, could you make one without the additional flange that routes the wastegate to the downpipe? Most companies actually recommend they be vented to the atmosphere.

[Superman09]

lets put it into action, could you make one without the additional flange that routes the wastegate to the downpipe? Most companies actually recommend they be vented to the atmosphere.

I am going to say no, I don't want to do a bunch of versions, just 2 maybe where a second downpipe and an adaptor is all that's needed to upgrade. I will look into a block off for the downpipe flanges if one wants to vent to atmosphere and then all you'd have to do is flip the wastegate around and it will dump straight down!