O Tay..
Announcement
Collapse
No announcement yet.
Hmm........
Collapse
X
-

i really could care less actually thats the reason i painted it. the flash of the camera REALLY makes it look worse than it really is. it wipes off with a gentle finger swipe. I hit some rain on the way back from allendale in august, and the car hasnt moved but a few feet since. its not like its salt or anything corrosive, itll get cleaned up in the spring when i have time.
Last edited by JoeliusZ28; November 18th, 2008, 03:02 PM.-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
That looks like a much cleaner install to me.Originally posted by 1BADAIR View Postmine is gonna look something like this
Western Michigan Camaro Club ~ President
1987 Camaro IROC-Z Pearl White & Black w/ Red Pearl, 355 TPI, A4, 3:42, AirRide,"GOMARO"2017 Silverado Double Cab Z71 Pepperdust Metallic, 5.3, A6, 3:42, "SASYZ71"WMCC Website www.wmcamaro.org
2005 Pontiac Grand Prix GT White, 3800
"A government big enough to give you everything you want,
is strong enough to take everything you have." — Thomas Jefferson
"Democracy will cease to exist when you take away from those who
are willing to work and give to those who would not." — Thomas Jefferson

Comment
-
From my experience that setup doesnt seem to sound nearly as good, and I am doing this for sound. Its not symmetric and mounting the mufflers more forward seems to give you a hollow muscle car sound that a rear-mounted setup doesnt seem to have.. Also rear mounted mufflers wont allow me to do the style of exit i want either. Additionally that requires a panhard relocation kit, whereas going over both sides does not (although i could still benefit from one). overall thats a very nice setup, but at this point im not even considering it as an option.Last edited by JoeliusZ28; November 18th, 2008, 04:23 PM.-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
Agree 100%Originally posted by JoeliusZ28 View PostFrom my experience that setup doesnt seem to sound nearly as good, and I am doing this for sound. Its not symmetric and mounting the mufflers more forward seems to give you a hollow muscle car sound that a rear-mounted setup doesnt seem to have.. Also rear mounted mufflers wont allow me to do the style of exit i want either. Additionally that requires a panhard relocation kit, whereas going over both sides does not (although i could still benefit from one). overall thats a very nice setup, but at this point im not even considering it as an option.just a bolt-on Lt1
Comment
-
i really hope you mean that in a performance sense because i couldnt disagree more from a sound viewpoint.Originally posted by WMCCjames View PostThat is a NICE set-up! The further back the mufflers the better!-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
I figured but it sounds like youre worried about scavenging on a dual 3" system with an x-pipe
I should be overkilling at that point already with only low 4xx hp.
-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
True....with a dual 3 inch and only 400hp it's not going to make a hill of beans if the muffs are ahead of the axle or behind, I was just referring to an exhaust system in general and restriction.....the further back a restriction is in the exhaust stream the less effect if has on the cylinder.sigpicTurbo Charged LS1/T56
Comment
-
In general i definitely agree with you
I am also going to *try* to fit cutouts just ahead of the mufflers, but im not really counting on that happening
What fits, fits.
Last edited by JoeliusZ28; November 18th, 2008, 08:40 PM.-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
looks like iffy waters, the other way you had it set up just seems like its asking for some clunking, sure theres room now but what about when the car is under stress? Guess you'll have to see when your done, gonna take a LOT of little tweaking, im excited to see it though, if you can get something to work I might just have to copy it somedayOriginally posted by JoeliusZ28 View PostIn general i definitely agree with you
I am also going to *try* to fit cutouts just ahead of the mufflers, but im not really counting on that happening
What fits, fits.
.
-Derek-
1999 Pontiac Trans Am Ram Air- Lots of Boltons..

Comment




Comment