Any ideas? Plugs fouled after 2 minutes

[OIF1VET]

do you have any codes?

-a shot it the dark is to check your fuse for "engine sensor". It controls vital sensors like the MAF, etc. If blown it can cause major issues

-I would also test your fuel pressure to see if you have a failing FPR, causing the pressure to be abnormally high (above 4 bar) which would make the injectors to flow more.

-make sure all your coils are plugged in!



Be careful running that thing if that rich, I would be scared for cylinder washdown if you really try to let it run.

It hasn't ran more than 3-4 minutes total.. Checked coils, I had a TPS code and a MAF code yesterday, low voltage... I cleared them and they haven't came back... Guess I'll check my fuse.. These plugs don't seem fuel soaked, just completely black after 1-2 minutes max..

[ThreeHonks]

do you have any codes?

-a shot it the dark is to check your fuse for "engine sensor". It controls vital sensors like the MAF, etc. If blown it can cause major issues

-I would also test your fuel pressure to see if you have a failing FPR, causing the pressure to be abnormally high (above 4 bar) which would make the injectors to flow more.

-make sure all your coils are plugged in!



Be careful running that thing if that rich, I would be scared for cylinder washdown if you really try to let it run.

[OIF1VET]

Started my car yesterday, ran like absolute shit. Checked plugs, fouled out.. Put new plugs in this morning, started car, sound good for about 10 seconds and then back to spitting and sputtering.. Ran car for 2 minutes max, pulled plugs, fouled out.. Other than cosmetic stuff, the only thing I have changed is the injectors(same injectors just rebuilt).. Sorta lost, Thoughts..