Picked up a 4L80e

[Formula Z]

Was delivered tonight. Cant wait

Sent from my SPH-D710 using Tapatalk 2

[Formula Z]

anyone know where i can get an adapter housing and parts to make this work? been doing some researching but havent actually called anyone yet. or if anyone knows who to call to save me some headache. i need to do this cheap as possible without cutting any corners. thanks

[Nocooler]

Is that a 4wd trans?

You'll have to swap the output shaft if it is........

[hoogiesngrinderz]

Is that a 4wd trans?

You'll have to swap the output shaft if it is........

I believe it is, and I thought the same thing.

New shaft, tailhousing, etc...going to be a pain in the ass

[Formula Z]

Lol wont be an issue at all. Couple buddies and myself, this is what we do 40+ hrs a week. Thanks for the concern although. Planned in going through it and updating/upgrading sprag and bands and couple other things. Even considering a transbrake

Got it under control

Picked it up for $100 so im gonna put some money into it

Sent from my SPH-D710 using Tapatalk 2

[hoogiesngrinderz]

Well then

[Nocooler]

Lol wont be an issue at all. Couple buddies and myself, this is what we do 40+ hrs a week. Thanks for the concern although. Planned in going through it and updating/upgrading sprag and bands and couple other things. Even considering a transbrake

Got it under control

Picked it up for $100 so im gonna put some money into it

Sent from my SPH-D710 using Tapatalk 2

If you are going to tear it fully down - then it's not an issue

You going to put Jake's kit in it or something else?

[Formula Z]

Definately looking at jakes, ecspecially if something else that possibly may be in the works, works out

Sent from my SPH-D710 using Tapatalk 2

[Formula Z]

Lets just say, i dont ever want to have to get into the trans again after its installed

Sent from my SPH-D710 using Tapatalk 2

[Formula Z]

anyone know where i can get an adapter housing and parts to make this work? been doing some researching but havent actually called anyone yet. or if anyone knows who to call to save me some headache. i need to do this cheap as possible without cutting any corners. thanks

Again anyone got a hook up?

Sent from my SPH-D710 using Tapatalk 2

[Formula Z]

ok i guess im on my own with that. another thing im finding is that the 98 pcms wont run the 4l80e so that means ill most likely have to get a standalone or swap my 98 pcm for a 99+. whats involved in the pcm swap?

[1BADAIR]

any pcm that will run a 4l60 should run a 80. the connectors are the same too. just move a few pins. phil told me something about the input shaft speed sensor. ill have to ask again


http://ls1tech.com/forums/automatic-...-required.html

[alwaysmessedup]

http://www.transmissioncenter.net/4l80e.htm. check this out mike I'm sure u will find parts u need, as far as the wiring I think we can handle repinning it and adding input conector...

[Formula Z]

Yeah ive been on that site a few times already. Im sure we will figure it out

Sent from my SPH-D710 using Tapatalk 2

[Formula Z]

You guys think that a stock rebuild besides sprag and bands would be enough to hold the power or should i do something like a "monster in a box" stage build or the ss monster in a box from monster transmission???

Sent from my SPH-D710 using Tapatalk 2