[MENTION=254]JoeliusZ28[/MENTION]
Announcement
Collapse
No announcement yet.
Eastern Michigan M&G Caravan
Collapse
X
-
-
Im down. My house is at m59 / van dyke so home depot works for me. What time?-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
I'm at 25 and Schoenherr, so I'm down to meet at the Home Depot at M59 and M53. I say we take M59 all the way into Milford Road. Starts at 9a, so meet and leave at 8a?sigpic
Gary K
1973 Silver Z/28
Rebuilt matching numbers L-82. Factory 4-bolt mains and stock 350-350 3896962 cam, powdered-coated Edelbrock Performer intake, Cliff Ruggles-rebuilt Quadrajet, and Doug's ceramic headers. Tremec (Keisler) TKO-600 5-speed transmission and stock 3.73 Positraction rear end.
Comment
-
I'm 95% sure I'm in. Still tweaking done tuning, but. Think it should be good enough at that point. This is my first one - looking forward to it!1996 Trans Am WS6
Custom grind comp cam (248-254/111 w/ .552/.571 lift)
LS7 lifters, stainless roller rockers, valve springs, and hardened push rods
Wallbro 255 pump, Aeromotive filter and regulator
Bosch 30# injectors
Stainless long tube headers with ORY and
3" polished stainless Magnaflow cutback
Soon-to-be OBD1!
Comment
-
So looks like we have -
Myself @HenryZ28 @JoeliusZ28 @MP81 @germ79
What about @Kleineken @farmington [MENTION=715]DRYSUMP[/MENTION]
Meeting at home depot and running M59 into milford at 8 AM or maybe a little before?Last edited by QuickTop; June 3rd, 2016, 05:11 PM.1997 Trans Am
T56 swap. LS1 Cosmetics
Comment
-
I'm in for 8am at home depot and taking m59 to milford then down. I've always had crap luck when there has been construction in years past. I'm also trying to find out if [MENTION=4331]Lucky[/MENTION]SOB will join us and @SSon20s plus one other buddy.Last edited by DRYSUMP; June 3rd, 2016, 05:19 PM.
sigpic
No longer your average SS
Comment
-
Sorry we weren't there guys - we didn't get out of the house quick enough to be there by 8. We ended up going to the Lingenfelter show first, which was awesome, and then we made our way to the M&G. Wish I would have been able to meet up with you guys so I could put faces to screen names and get to know some folks in my neck of the woods!1996 Trans Am WS6
Custom grind comp cam (248-254/111 w/ .552/.571 lift)
LS7 lifters, stainless roller rockers, valve springs, and hardened push rods
Wallbro 255 pump, Aeromotive filter and regulator
Bosch 30# injectors
Stainless long tube headers with ORY and
3" polished stainless Magnaflow cutback
Soon-to-be OBD1!
Comment


Comment