Looking for a 9 or perferably a 10 bolt with functioning posi, and 3:23-3.45 rear gear. This is going into my dads 1988 iroc, and we are looking for a better ratio with posi to go behind the auto. It currently has 2.73 with a weak posi. Let me know what you have, have cash and are willing to pick it up.
Announcement
Collapse
No announcement yet.
Wanted: third gen rear axle
Collapse
X
-
I could possibly be selling my 10 bolt with drums, TruTrac and 3.73. Is that something you're interested in? I'm not gonna lie to you thought, the rear was rebuilt for a noise. So I built it, and it still makes a noise. Now, I'm not sure if it's the rear or not, but if you're interested in it, I can try and figure that out. Honestly I'm more so suspecting the noise is from my transmission.Originally posted by pferris View PostStill looking.
Only reason I'm considering selling is because I'm toying with going to a different axle all together.
Comment
-
3.73 is a little aggressive i think for a stock 350 and 700r4. The drums wont be needed as we are swapping it over to LS disk brakes all around. I will see what else comes up, and if nothing better we may pick this up. If you confirm if the diff or trans is making the noise, let me know.Originally posted by NullHead View PostI could possibly be selling my 10 bolt with drums, TruTrac and 3.73. Is that something you're interested in? I'm not gonna lie to you thought, the rear was rebuilt for a noise. So I built it, and it still makes a noise. Now, I'm not sure if it's the rear or not, but if you're interested in it, I can try and figure that out. Honestly I'm more so suspecting the noise is from my transmission.
Only reason I'm considering selling is because I'm toying with going to a different axle all together.1998 Pontiac Firebird T/A, M6, LT Headers, ORY, Borlamouth, tubular LCA and Panhard bar, lowered 1.5". More to come
Comment
-
Does it have good limited slip? Any noise or leaks? What would you want for the axle?Originally posted by ruckusz28 View PostI will have one around spring. Its a 10 bolt with 3.23 gears, rear drum.1998 Pontiac Firebird T/A, M6, LT Headers, ORY, Borlamouth, tubular LCA and Panhard bar, lowered 1.5". More to come
Comment
-
Enthusiast- January 1st, 2009
- 342
- Chris
- 1987,Chevy,Camaro(IROC)
- Jenison, Mi
- Gentex production maintenance
- Send PM
I also have a 10 bolt, 3.73 gears, no brakes, doesn't leak, and brand new fluidAir Force/Afghanistan veteran
1987 Iroc camaro Supercharged 5.3
2012 Toyota tacoma
Comment
-
Post Slut
- December 9th, 2011
- 5919
- Michael H
- 1989 Iroc-Z Convertible/1998 Z28
- Lowell, MI
- Meat Processor
- Send PM
Drum to disc isn't a seemless swap. I'm currently using drum to disc adapters from Flynbye and I hate them.
1998 Camaro Z28 - Bright Red, 6.0 TR224, 4l60e, 3.42 Eaton TrueTrac
1989 Camaro IROC-Z Convertible - 355 big tube TPI, WC T5, 3.42 Zexel Torsen, CTS-V/C4 brakes
1955 Bel Air 2 Door Post - 357 TPI, Muncie M20, 4 wheel disc
2006 Saab 9-7x 5.3i Daily Driver
Comment

Comment