Announcement

Collapse
No announcement yet.

WTB: Factory exhaust hangers

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • WTB: Factory exhaust hangers

    Looking to buy the two rear-most factory exhaust hangers like what came on SLP exhausts. They basically bolt through holes in the frame rail and support the exhaust near the tail pipes. Ideally they should be in excellent condition but I'm not going to be too picky depending on price. I've included a pic below of what I'm talking about. Anyone have anything?

    hppp_0705_21_z+2001_pontiac_trans_am_corsa_exhaust_install+installed_brackets.jpg
    hppp_0705_17_z+2001_pontiac_trans_am_corsa_exhaust_install+brackets.jpg

  • #2
    They are hard to find, I just sold my passenger side I think for $45-50, and it was really clean. If you need a support around the trans housing I have that for LS1 cars

    here is a great deal, but probably wont stay at that price.
    http://www.ebay.com/itm/98-02-Pontia...775ac9&vxp=mtr
    '91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components

    " When in doubt...throttle out ! "
    ENVYsion Entertainment Group

    Comment


    • #3
      Thanks Greg but those aren't the ones I'm looking for. I just need the two that support the tailpipes right behind the tips. I'm pretty sure they only came on SS's/Firehawks with the dual/dual catback and/or some aftermarket catbacks like the SLP Powerflo and Corsa. I bought a set from Brent a couple years back for a good price but I need another set now. I actually have one of them so I really only need one of these.

      Comment


      • #4
        those are the factory rear brackets, that came on ls1 cars, they wont work ? Same style, same mounting area
        '91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components

        " When in doubt...throttle out ! "
        ENVYsion Entertainment Group

        Comment


        • #5
          Different mounting area. There are 4 brackets on the SLP optioned cars of which I need the two right behind the tips.

          Hard to find good pics but see how there are two on each side in these pics:

          0902gmhtp_19_z+2002_chevy_camaro_slp_performance_parts_headers_and_exhaust_upgrade+installing_po.jpg
          31085_3.jpg
          Last edited by birdie2000; August 6th, 2014, 09:47 AM.

          Comment


          • #6
            that makes it way more clear, I didn't even know there is mounting holes from the factory that far back. Thank you! guess thats another way to tell it a car is really an SLP optioned
            '91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components

            " When in doubt...throttle out ! "
            ENVYsion Entertainment Group

            Comment


            • #7
              Those look pretty easy to make. Can you talk to a local shop and have them reproduce the one you still have?
              My Toys: Hugger Orange 1999 Z28 6-Spd Twin Turbo
              1937 Chevy Extended Cab Pick-up (One of a kind)
              Future Toy: Orange Ultima GTR or SLC

              Comment


              • #8
                Yeah, that was a thought. I have another idea as well. Just thought I'd see if anyone had any laying around.

                Comment

                Working...
                X