WTB: Factory Exhaust Hangers

[Superman09]

Putting a catback on my car and find I am missing a couple hangers.

Looking for the following:

-mount that bolts to the CAR, with the rubber, on the drivers side at back of the car
-mount that bolts to the factory catback that slides into the rubber mount on passenger side (I have the mount and rubber on pass. side, just need the actual bolt on hanger)

Thanks! If anyone can help with part numbers I would love to purchase new, thank you!

[SS Delux]

I know the post is old but does anyone have the hanger from the muffler to the rubber body mount ? I am putting a magnaflow catback on my car and dont have the hangers.

[Gregs_gsxr]

which side ? driver or passenger ?

[SS Delux]

I need both.

[Gregs_gsxr]

IMG_0376.jpg
IMG_0372.jpg

these are the ones I have. They are off of an LS car, they don't make them any longer, they are very clean.

[Gregs_gsxr]

Im using the driver side, the pics above are the passenger side and cat mount

[Gregs_gsxr]

here is a link to just one side of the mount.

http://www.ebay.com/itm/98-02-Camaro...ef4798&vxp=mtr

[SS Delux]

Thanks but I need both rear but not the cat mount.

[Gregs_gsxr]

well I'll sell you the passenger side if you want.

[SS Delux]

Still looking for some LT1 car exhaust hangers

[Gregs_gsxr]

wait a minute, lt1 or ls1 ?

[SS Delux]

LT1, but the pics that you posted are what I need.

[TOOSLO86]

Aaron, I'll be out working in the shop this evening, I'll see if I can't snap you some pics under the car. I'm the one who replied on FB. I kinda figured it was you since I had remembered seeing this on here a while back. If you don't hear back from me in a reasonable time remind me.

[Gregs_gsxr]

LT1, but the pics that you posted are what I need.

ok well then I have the one side.

[HighVoltage]

[ATTACH=CONFIG]55023[/ATTACH]
[ATTACH=CONFIG]55022[/ATTACH]

these are the ones I have. They are off of an LS car, they don't make them any longer, they are very clean.

[MENTION=2608]Gregs_gsxr[/MENTION]

if this is still available please PM me with price.