Tweet
Looking to see if anyone has a set of ls swap mounts laying around not getting used looking for a set for my 86 iroc thanks
-
-
well what way you going ? Spohn, hawks, dirty dingo ?'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment Group -
well you got me confused lol what do you mean I need the ones that bolt to my stock k member sry new to the ls world just trying to round up parts as I figure out what I need. I also need the motor side toComment
-
its not a problem, here is some reading to do, look at some of these swaps to get an idea
http://www.thirdgen.org/techboard/ltx-lsx/
or check out my build thread, just scan through it, if you want, come take a trip to my place and I can show you what I did, there is a couple different routes to go with. I went with the 4th gen engine side and spohn mounts for the k member.
http://www.mifbody.com/vbulletin/sho...915#post838915'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment GroupComment
-
Your setup sounds like what im looking forComment
-
if your free this weekend come on over and I can help you out. Since Ive done it, I found simple ways by doing things the hard way
When I get a second 3rd gen the swap will be way quicker and so much easier.
'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment GroupComment
-
where do you live at? I got to work from 7am to 7pm satComment
-
nm, your about 2hrs west of me. I can hel you along the way, how are you going to "redo" your camaro ? paint the bay? smoothing the bay mods?Last edited by Gregs_gsxr; August 29th, 2013, 06:33 PM.'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment GroupComment
-
-
Shouldnt you be studyingOriginally posted by Iroc'nthe87 View Post
'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment GroupComment
-
I Have some ls1 clam shells if you need them.
Sent from my SPH-L900 using Tapatalk 2Comment
-
Buy theseOriginally posted by masterfab View Post'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment GroupComment
-
if you buy Ken's claim shells you would need these :
http://www.hawksthirdgenparts.com/pr...s%2C-Pair.html
I also bought this for the trans cross member
http://www.hawksthirdgenparts.com/pr...Automatic.html
I also went with urathene engine mounts too
http://www.ebay.com/itm/Prothane-Ure...r#ht_55wt_1156
of course I shopped around'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment GroupComment
-
Yea ken how much shipped to jackson or i could pick them up not sure how far u are from me?Comment
-
Yea the spohn mounts are what im looking for kammi had some when i got my gearbox off him wish i would have bought them. I have a turbo 400 that im thinking about runningComment
Comment