i need parts for my 3rd gen

[beardy2]

i need a drivers door and ethier a manual trans or better gears for the rearend because right now i cant drive highway because of my transmission is a th350 and my rear end is a 3.73 or 2.73 possie i have been told both and the rpms a crazy high driving a steady 70mph. i would prefer to keep it possie and disk brakes if possible
if you can help me out let me know i would prefer to trade because im broke but ill see what i can do for cash.

517-250-8021

[beardy2]

anyone

[phoenix_rising]

Are the doors the same iff a firebird? I thought I had heard that they are. If they are I have a pair.

[Gregs_gsxr]

Are the doors the same iff a firebird? I thought I had heard that they are. If they are I have a pair.

should be, same body lines, the only difference might be holes for the ground effects may differ from each model.

[beardy2]

yeah i believe they should be and i can drill holes for my ground effects let me know what ur interested in for them 517-250-8021

[25thZ28]

Doors are same, just different GFX holes and different brackets are riveted on the inside of the door for arm rest. Beware of 91-92 trans am doors, they have 1 hole drilled very high for the GFX that won't be covered by camaro GFX.

[beardy2]

im still really interested

[Curt_irocz]

I have a PERFECT 9 bolt rear end with disc brakes and a 2.77 posi.
$150
But it would be a few weeks......

[badinfluence]

Hey Dustin . . . sounds like you have 3.73s because 2.73s should be pretty good on the hwy

I have a 4th gen rear end, 3.23s/LSD-posi/set up for disc brakes $100

Its wider than a 3rd gen rear and would stick out 1" on each side I believe, not sure if your brakes would be a direct bolt on to the axle either... I do have brakes for it but am using them on the 96 so I'd have to charge more...

Let me know if your interested.