Tweet
Hey All,
I sold my Camaro and am going to be doing an LSx swap on my car.. so I will be selling off all of my Gen I SBC parts.. I am going to try and get back to everyone as smoothly and quickly as possible.. this ad kind of fell through before because of a lot of family stuff over the past few months.. but from here on out I should be able to get stuff out to people as quickly as possible.. the larger items I would prefer not to ship, but might be willing to put in the back of my truck and meet up somewhere (you pay gas of course).. I would actually prefer everything be pickup only.. but I know that won't be the case.. so if it needs to be shipped I will work with you on that.. so all the listed prices are WITHOUT shipping included.
ask any questions and I will try and get more pics up.
350 long block engine - SOLD
- .040 over flat top hypereutectic pistons
- .010 under crank journals
- Moly rings
- Bimetal bearings
- High volume oil pump
- ARP fasteners
- stock rods/crank
- Heads (L05 rebuilt and milled slightly, with Crane Valve Springs.)
- Proform timing chain cover and cam button
- F-body oil pan
- Comp Cams Thumpr Cam (279TH7)
- Comp Cams Lifters (came w/ Thumpr Cam)
- Proform gear drive
- Summit One piece forged chromemoly pushrods.
- Crane Gold Race Full Roller Rocker Arms (1.5, non self aligning, narrow body, extra cost if wanted)
700r4 Transmission - $375obo (not immediately available)
- Stock converter
- New filter and fluids
Summit Racing Street & Strip Stage 1 Intake Manifolds SUM-226016 - $115obo
- needs cleaning up some
MSD Pro-Billet HEI Distributor (8365) - SOLD
- very low usage
- still have original box with springs and weights
Holley 670cfm Street Avenger (0-83670) - SOLD
- in working condition
- may need going through at some point
- polished aluminum
- comes with fuel rail with fuel pressure gauge
Holley High flow fuel pump, with pushrod and mounting plate - $100obo
- used in working condition
Hedman Elite HTC headers (68476?) and y-pipe (17478) - $375obo
- slight surface rust on headers
- y-pipe is rusty but still usable, was painted black but burned off
- comes with header gaskets and exhaust paint
Trans-Dapt oil dipstick kit (8142) - $30obo
Proform Black Valve Covers (141-131) - $100obo
Holley throttle bracket (HLY-20-95) - SOLD
Holley kickdown bracket (HLY-20-121) - $15
K&N drop base air cleaner (KNN-66-3040) - $90obo
B&M torque converter 700-r4 lockup kit (B&M-70244) - $150obo
B&M Megashifter kit (B&M-80692) - $175obo
- used, no box
- some parts show wear, but still very usable
700r4 Transmission cooling lines (custom made by fine lines inc) SOLD
700r4 Drive shaft (not immediately available) - $50obo
700r4 Torque Arm (not immediately available) - $90obo
Summit high torque mini starter (SUM-820323?) - $150obo
L98 Serpentine Kit - $300obo
- both brackets
- power steering pump
- alternator
- pulleys
- water pump
SBC gen 1 generic HEI distributor msd knockoff - make offer (PENDING)
Carter mechanical oem style fuel pump - make offer
70's Truck quadrajet carb, needs rebuilt - make offer
Cast iron quadrajet intake, manifold bolt holes were slit to work on later style heads - make offer
Stock stamped steal valve covers - make offer SOLD
I sold my Camaro and am going to be doing an LSx swap on my car.. so I will be selling off all of my Gen I SBC parts.. I am going to try and get back to everyone as smoothly and quickly as possible.. this ad kind of fell through before because of a lot of family stuff over the past few months.. but from here on out I should be able to get stuff out to people as quickly as possible.. the larger items I would prefer not to ship, but might be willing to put in the back of my truck and meet up somewhere (you pay gas of course).. I would actually prefer everything be pickup only.. but I know that won't be the case.. so if it needs to be shipped I will work with you on that.. so all the listed prices are WITHOUT shipping included.
ask any questions and I will try and get more pics up.
350 long block engine - SOLD
- .040 over flat top hypereutectic pistons
- .010 under crank journals
- Moly rings
- Bimetal bearings
- High volume oil pump
- ARP fasteners
- stock rods/crank
- Heads (L05 rebuilt and milled slightly, with Crane Valve Springs.)
- Proform timing chain cover and cam button
- F-body oil pan
- Comp Cams Thumpr Cam (279TH7)
- Comp Cams Lifters (came w/ Thumpr Cam)
- Proform gear drive
- Summit One piece forged chromemoly pushrods.
- Crane Gold Race Full Roller Rocker Arms (1.5, non self aligning, narrow body, extra cost if wanted)
700r4 Transmission - $375obo (not immediately available)
- Stock converter
- New filter and fluids
Summit Racing Street & Strip Stage 1 Intake Manifolds SUM-226016 - $115obo
- needs cleaning up some
MSD Pro-Billet HEI Distributor (8365) - SOLD
- very low usage
- still have original box with springs and weights
Holley 670cfm Street Avenger (0-83670) - SOLD
- in working condition
- may need going through at some point
- polished aluminum
- comes with fuel rail with fuel pressure gauge
Holley High flow fuel pump, with pushrod and mounting plate - $100obo
- used in working condition
Hedman Elite HTC headers (68476?) and y-pipe (17478) - $375obo
- slight surface rust on headers
- y-pipe is rusty but still usable, was painted black but burned off
- comes with header gaskets and exhaust paint
Trans-Dapt oil dipstick kit (8142) - $30obo
Proform Black Valve Covers (141-131) - $100obo
Holley throttle bracket (HLY-20-95) - SOLD
Holley kickdown bracket (HLY-20-121) - $15
K&N drop base air cleaner (KNN-66-3040) - $90obo
B&M torque converter 700-r4 lockup kit (B&M-70244) - $150obo
B&M Megashifter kit (B&M-80692) - $175obo
- used, no box
- some parts show wear, but still very usable
700r4 Transmission cooling lines (custom made by fine lines inc) SOLD
700r4 Drive shaft (not immediately available) - $50obo
700r4 Torque Arm (not immediately available) - $90obo
Summit high torque mini starter (SUM-820323?) - $150obo
L98 Serpentine Kit - $300obo
- both brackets
- power steering pump
- alternator
- pulleys
- water pump
SBC gen 1 generic HEI distributor msd knockoff - make offer (PENDING)
Carter mechanical oem style fuel pump - make offer
70's Truck quadrajet carb, needs rebuilt - make offer
Cast iron quadrajet intake, manifold bolt holes were slit to work on later style heads - make offer
Stock stamped steal valve covers - make offer SOLD
Summer/Fall Driver
Comment