Lots of V6 parts + 17" Wbody wheels

[04DetroitLS]

Thinking of selling my rims....
SOLD!!


Prices on these parts are OBO!

1997 F-body A/C $150
includes most lines, compressor, condensor, cannister thingy worked when removed


L26/32 injector rails (alum) $20
L26/36 injectors $35for a set (x2)
L32 Injectors $50/set (x1)


L67 LIM + GenIII S/C (about 125k) $150
L36 LIM, UIM, Fuel rail + Injectors $125 (04 impala)
2 sets exh manifolds $50/set off a L26 fwd car INCLUDING xover
stock fbody exhaust mani set SOLD
L26/36 balancers $25
L26 plastic valve covers $25/set
L26/32 DBW TB's $25
L36 TB $25(04 impala)
L67 TB $35
L26 heads $125loaded only 4k miles $75bare
L36 heads $100 LOADED (40k) $75 bare

Head casting #s





1997 FBody heads


GT1 Cam used about 20k miles $200


have a bunch of sensors etc lying around Im still trying to organize, willing to entertain trades as well (need mostly interior parts/pass side fender/turbo cam)

1997 V6 ABS box $65
97 UIM/LIM 4100
Alum VC's $50 OEM unpainted
Plastic VC's $35 black off L26

Feel free to PM....

[Kwazrollinz28]

Kinda off topic but i've been wanting to see your impala build for awhile, it looks sick in your avy

[04DetroitLS]

thanx

heres the link to one of the build threads, I have a few more scattered around teh intrawebz, lmk if you have any questions

[04DetroitLS]

Bump
Wheels are gone have a few L36 engines here, also a L1A (3.4) from an 05 Imp, still looking to get rid of this stuff!
also have alum and plastic VC's tons of other stuff

[Gottork]

whats a L36 engine?

[phoenix_rising]

I am looking to build up my new L36 before the swap. I see you have many L36 / L67 parts for sale. What would you have that I could use? Are those heads in good shape? I was thinking about port matching a set of heads for my new engine.

[ktl711]

whats a L36 engine?

If I'm not mistaken, L36 is the code for the Buick-designed NA 3800 Series II V6 motor, and L67 is its supercharged equivalent.

[phoenix_rising]

whats a L36 engine?

L36 is the RPO code for the GM N/A 3800 II motor found in fbodys, bonnevilles, grand prixs, and such. If the engine is blown it owould be an L67 or other derivative.

[phoenix_rising]

If I'm not mistaken, L36 is the code for the Buick-designed NA 3800 Series II V6 motor, and L67 is its supercharged equivalent.

Doh Kevin! Great minds think alike. BTW the car was looking good on Wooward. Can't wait to see it with the new hood!

[ktl711]

Doh Kevin! Great minds think alike. BTW the car was looking good on Wooward. Can't wait to see it with the new hood!

Thanks!

But now I guess I'd better get that hood over to Brian so his shop can get started on painting it!

[Gottork]

thanks guys

[04DetroitLS]

sorry so late... been busy doing a 3400->3800s/c swap over the holiday, ill post a thread on it after its all buttoned up

i have one set 1k heads, one set 4k heads, one set 40k heads, yes they are in good condition overall, valves could prob use a spit shine (yay ppl using crappy gas) but as far as i can see no cracks etc.. FWIW, these heads ARE very prone to hairline cracks in the valve seats, none of these heads show them yet, but i can not guarntee that a magnaflux will not show any stress.. I went thru 6 sets of lo mile L67 heads before i found 2 heads that weren't cracked between the seats.....

LMK what all you are looking for, Im sure i have most of it here

I also have a L26 rotating w/ 40k and a L36 block here as well (would need all new seals/bearings/etc) just to be on the safe side.. but thats just my .02, and i get pretty anal when building an engine I'd rather over build something than have to redo work

I'll PM you my # feel free to call w/ any questions...

[phoenix_rising]

Still have the GT1 Cam? Will that work with my application? Also the ZZP website mentions that this cam can be used with light boost applications is that correct?

[04DetroitLS]

Ttt

[04DetroitLS]

bump?