Announcement

Collapse
No announcement yet.

wrecked '02 Trans AM

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    is the driver-side spindle intact? If so, how much do you want for both front spindles?

    1996 Camaro Z28 cam, heads, stall, and a few other goodies
    Alumni Member, MSU Racing Club
    THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
    Originally posted by JasonH
    It's amazing what you can get done when you throw copious amounts of money at something.

    Comment


    • #17
      Originally posted by Formula Z View Post
      what do you need for the passenger door? if it doesnt sag and paints in decent condition....

      and where in west michigan is it located?

      and possible ashtray lid? (one side of mine is broke)
      The passenger door is in good condition. do you want the whole door with the door panel and all the wiring? there is the typical vertical crack on the door sill that almost every ls1 has it seems. other than that, the only thing missing from the door is the mirror. a pic of the outside is on page 1 of thread. The car is in Sheridan about 15 min. north of Ionia. I'll have to take a look around to make sure i've still got the ashtray lid, I'm pretty sure i've got it and I'll set it aside.

      Door w/panel:$200
      Door w/o panel: $150
      ash tray lid: $10

      PM me if interested and I can get you a pic of the door panel and give you my dad's # so you can go over there and see it for yourself. Thanks.
      sigpic
      1988 Chevy Camaro- 400 sbc, Ls1 rear 3.23 gears, T5. body work in progress

      Comment


      • #18
        Originally posted by bri2203 View Post
        How much are you looking to get for the engine and wiring?

        I can't believe no one hasn't asked..whatr happened?
        My dad was T-boned when a guy ran a light...hit him in the front driver fender, spun him around until his driver rear hit another car. driver's side is toast... passenger side was unscathed.

        Sorry for the long answer to the engine question, but here goes... My dad has decided to look for another 4th gen TA, so he's reluctant to get rid of the motor, trans, harness until he knows he doesn't need it. That being said, if he doesn't have to pull it and the price is right, he'd still let it go. He knows how the engine was maintained and doesn't want to let it go for nothing. $2000 for Engine, Trans, and harness.
        sigpic
        1988 Chevy Camaro- 400 sbc, Ls1 rear 3.23 gears, T5. body work in progress

        Comment


        • #19
          Originally posted by alone_and_insane View Post
          is the driver-side spindle intact? If so, how much do you want for both front spindles?
          The driver's side spindle is right where the car was hit, so i can't promise that it's in great shape... I'd have to take a look next time i'm over there. Assuming there both good to go, $40 each seems to be pretty standard (ebay, craigslist, etc...) Thanks.
          sigpic
          1988 Chevy Camaro- 400 sbc, Ls1 rear 3.23 gears, T5. body work in progress

          Comment


          • #20
            Originally posted by camaro42 View Post
            My dad was T-boned when a guy ran a light...hit him in the front driver fender, spun him around until his driver rear hit another car. driver's side is toast... passenger side was unscathed.

            Sorry for the long answer to the engine question, but here goes... My dad has decided to look for another 4th gen TA, so he's reluctant to get rid of the motor, trans, harness until he knows he doesn't need it. That being said, if he doesn't have to pull it and the price is right, he'd still let it go. He knows how the engine was maintained and doesn't want to let it go for nothing. $2000 for Engine, Trans, and harness.
            The original semi-complete price was $2,000 OBO. lol

            Good Luck too rich for my blood.

            Comment


            • #21
              We've decided to part out the 2000 TAr. prices below are obo. Make me a reasonable offer...

              What's available:
              Engine LS1
              Auto Trans
              Wiring Harness $1,500 for engine trans and harness together

              Gas Tank $150
              T Tops w/shades(both sides) $250
              Rear Plastics $150
              Passenger Tail light $150
              Passenger Door $200 w/panel $150 w/o
              Door Panel $50
              Passenger Fender $100
              Passenger Quarter $50 and u cut it out
              Hatch (glass is good, wing and rear corner of hatch has damage *see pic*) $75
              Dash $300 for dash w.gauges (make me an offer for select parts)
              Anything else you need, just ask and I'll make sure it's in good shape before I quote a price. Pictures of all pieces above are on page 1 of thread.

              Thanks!
              Last edited by camaro42; June 26th, 2011, 01:17 PM.
              sigpic
              1988 Chevy Camaro- 400 sbc, Ls1 rear 3.23 gears, T5. body work in progress

              Comment


              • #22
                Headliner Sold.
                sigpic
                1988 Chevy Camaro- 400 sbc, Ls1 rear 3.23 gears, T5. body work in progress

                Comment


                • #23
                  Rear bumper available? I cant tell if it's damager on the driver side or not. Let me know, thanks.

                  Comment


                  • #24
                    Sweetride98 has the car now and is selling parts from it.

                    Comment

                    Working...
                    X