is the driver-side spindle intact? If so, how much do you want for both front spindles?
Announcement
Collapse
No announcement yet.
wrecked '02 Trans AM
Collapse
X
-
Post Whore
- February 19th, 2010
- 3991
- Peter Schultz
- 1996 Z28
- Livonia/Plymouth
- Transmission Calibration Engineer, Ford Motor Company
- Send PM

1996 Camaro Z28 cam, heads, stall, and a few other goodies
Alumni Member, MSU Racing Club
THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
Originally posted by JasonHIt's amazing what you can get done when you throw copious amounts of money at something.
-
The passenger door is in good condition. do you want the whole door with the door panel and all the wiring? there is the typical vertical crack on the door sill that almost every ls1 has it seems. other than that, the only thing missing from the door is the mirror. a pic of the outside is on page 1 of thread. The car is in Sheridan about 15 min. north of Ionia. I'll have to take a look around to make sure i've still got the ashtray lid, I'm pretty sure i've got it and I'll set it aside.Originally posted by Formula Z View Postwhat do you need for the passenger door? if it doesnt sag and paints in decent condition....
and where in west michigan is it located?
and possible ashtray lid? (one side of mine is broke)
Door w/panel:$200
Door w/o panel: $150
ash tray lid: $10
PM me if interested and I can get you a pic of the door panel and give you my dad's # so you can go over there and see it for yourself. Thanks.sigpic
1988 Chevy Camaro- 400 sbc, Ls1 rear 3.23 gears, T5. body work in progress
Comment
-
My dad was T-boned when a guy ran a light...hit him in the front driver fender, spun him around until his driver rear hit another car. driver's side is toast... passenger side was unscathed.Originally posted by bri2203 View PostHow much are you looking to get for the engine and wiring?
I can't believe no one hasn't asked..whatr happened?
Sorry for the long answer to the engine question, but here goes... My dad has decided to look for another 4th gen TA, so he's reluctant to get rid of the motor, trans, harness until he knows he doesn't need it. That being said, if he doesn't have to pull it and the price is right, he'd still let it go. He knows how the engine was maintained and doesn't want to let it go for nothing. $2000 for Engine, Trans, and harness.sigpic
1988 Chevy Camaro- 400 sbc, Ls1 rear 3.23 gears, T5. body work in progress
Comment
-
The driver's side spindle is right where the car was hit, so i can't promise that it's in great shape... I'd have to take a look next time i'm over there. Assuming there both good to go, $40 each seems to be pretty standard (ebay, craigslist, etc...) Thanks.Originally posted by alone_and_insane View Postis the driver-side spindle intact? If so, how much do you want for both front spindles?sigpic
1988 Chevy Camaro- 400 sbc, Ls1 rear 3.23 gears, T5. body work in progress
Comment
-
The original semi-complete price was $2,000 OBO. lolOriginally posted by camaro42 View PostMy dad was T-boned when a guy ran a light...hit him in the front driver fender, spun him around until his driver rear hit another car. driver's side is toast... passenger side was unscathed.
Sorry for the long answer to the engine question, but here goes... My dad has decided to look for another 4th gen TA, so he's reluctant to get rid of the motor, trans, harness until he knows he doesn't need it. That being said, if he doesn't have to pull it and the price is right, he'd still let it go. He knows how the engine was maintained and doesn't want to let it go for nothing. $2000 for Engine, Trans, and harness.
Good Luck too rich for my blood.
Comment
-
We've decided to part out the 2000 TAr. prices below are obo. Make me a reasonable offer...
What's available:
Engine LS1
Auto Trans
Wiring Harness $1,500 for engine trans and harness together
Gas Tank $150
T Tops w/shades(both sides) $250
Rear Plastics $150
Passenger Tail light $150
Passenger Door $200 w/panel $150 w/o
Door Panel $50
Passenger Fender $100
Passenger Quarter $50 and u cut it out
Hatch (glass is good, wing and rear corner of hatch has damage *see pic*) $75
Dash $300 for dash w.gauges (make me an offer for select parts)
Anything else you need, just ask and I'll make sure it's in good shape before I quote a price. Pictures of all pieces above are on page 1 of thread.
Thanks!Last edited by camaro42; June 26th, 2011, 01:17 PM.sigpic
1988 Chevy Camaro- 400 sbc, Ls1 rear 3.23 gears, T5. body work in progress
Comment
-
InActive Member- September 22nd, 2010
- 27
- Thomas O'Neill
- 1994 Firebird Formula
- Ypsilanti, MI
- Car Sales at Gene Butman
- Send PM
Rear bumper available? I cant tell if it's damager on the driver side or not. Let me know, thanks.
Comment
Comment