Announcement

Collapse
No announcement yet.

Cruise/Wiper lever problem

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cruise/Wiper lever problem

    Well today driving down a country road a car was coming and I went to go turn my brights off and they wouldn't turn off. Finally I figured out I had to tilt my wheel up two notches. Sometimes I can't get my turn signals to work either.I was wondering if anyone else had this problem and how do you fix it.

  • #2
    Uh oh...friend had the same issue. It sounds like the turn signal/wiper "stalk" is out of position. Usually happens if you let the steering wheel snap up, or by just heavy use. The only way i know of fixing it is by actually opening up the steering column and replacing the switch inside, or adjusting the small clips, which i DONT advise you to do unless you have the right tools, and experience. Ya dont wanna be out a turn signal and brights, if ya need um. But hey don't let me stop you! lol.
    Last edited by sping012; July 31st, 2006, 02:46 AM.

    Comment


    • #3
      anyone else with a third gen have this problem?

      Comment


      • #4
        These may be of some help.

        http://www.thirdgen.org/dimmer

        http://www.thirdgen.org/cruisecontrolfix

        The sites server is really slow right now.

        Cat.


        Originally posted by 81DaytonaPaceCar

        Clamaped up tighter than a 15 year old on her first prom date...


        Comment


        • #5
          Originally posted by thursday12889
          Well today driving down a country road a car was coming and I went to go turn my brights off and they wouldn't turn off. Finally I figured out I had to tilt my wheel up two notches. Sometimes I can't get my turn signals to work either.I was wondering if anyone else had this problem and how do you fix it.

          get a 4th gen LMAO, J\K
          It's always a pain to take off the steering column, just take your time and try to remember where everything came from
          1996 CAMARO Z\28 M6

          Comment


          • #6
            Originally posted by 96mikez28
            get a 4th gen LMAO, J\K
            It's always a pain to take off the steering column, just take your time and try to remember where everything came from
            Getting a 4th gen won't fix that. . . I have the exact same problem with the brights, and when I turn on the left turn signal, I have to manually flip it back to the center position. . . Right t/s works fine, but the left, brights, and Cruise control don't work.
            Nick H.
            Current MIFC Vice President

            sigpic

            Comment


            • #7
              thanks for posting up those links, but i don't think i'm going to install a floor dimmer, and my cruise control works just fine, I think when i go into work tomorrow after I get some r-12 to recharge my AC i'll talk to one of the techs and see if it would be something i could do without getting too pissed off.

              Comment

              Working...
              X