Announcement

Collapse
No announcement yet.

panhard bar question

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • panhard bar question

    The bar that runs across to the other side with the 3 bolts in that mounts in the hole about the panhard bar do you have to leave that on with a ajustable panhard bar. 4th gen camaro

  • #2
    Originally posted by mazakman View Post
    The bar that runs across to the other side with the 3 bolts in that mounts in the hole about the panhard bar do you have to leave that on with a ajustable panhard bar. 4th gen camaro
    Leave it alone. I have removed a lot of weight form my car and I left it there. It ties the rear frame rails together and I think it helps hold the gas tank up.

    Comment


    • #3
      If youre talking about this bar then yes it stays.

      DSCN0186.JPG
      Originally posted by Yoshi94
      Mines about an inch bigger than Kyles. I need to get one of those
      Originally posted by ryanwarby01
      Put it this way, if you have a money tree a LT1 is a wood chipper!
      sigpic

      Comment


      • #4
        That's the one.

        Comment


        • #5
          Yes sir that bar stays in.

          You can see I have an adjustable panhard bar and that bar is still in.
          Now they make a tubular one if you want to run like 3in exhaust over the axle.

          DSCN0204.JPG
          Originally posted by Yoshi94
          Mines about an inch bigger than Kyles. I need to get one of those
          Originally posted by ryanwarby01
          Put it this way, if you have a money tree a LT1 is a wood chipper!
          sigpic

          Comment


          • #6
            I had everything in the rear tore out redoing it and just wasn't sure with a ajustable panhard bar if that was still needed

            Comment

            Working...
            X