Announcement

Collapse
No announcement yet.

Datamaster Log Trouble shooting help?

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Datamaster Log Trouble shooting help?

    Hey guys just did my timing cover gasket and im not sure why im experiencing some of the weird issues im having, any help would be great. My fans arent turning on at all. I'm getting a low rpm vibration or shake around 1500-2000, i think it possibly is my exhaust but i still have to look at it. Sorry for such a short log but if anyone sees anything ill gladly do another log.
    log 2.uni

  • #2
    You have a problem somewhere on the right side. Whether it be a exhaust leak or something. Super lean on the right bank.
    Originally posted by Yoshi94
    Mines about an inch bigger than Kyles. I need to get one of those
    Originally posted by ryanwarby01
    Put it this way, if you have a money tree a LT1 is a wood chipper!
    sigpic

    Comment


    • #3
      did you get harmonic balancer reinstalled correctly? Opti spark correct and are wires going to correct plugs?
      sigpic
      1998 Trans Am Convertible A4 - WS6 hood, WS6 air lid, WS6 rims, drilled/slotted rotors.

      Comment


      • #4
        Originally posted by Fox Slaughter View Post
        You have a problem somewhere on the right side. Whether it be a exhaust leak or something. Super lean on the right bank.
        Should i try replacing the gaskets? Then run a log?

        Comment


        • #5
          Originally posted by Plum Nuts View Post
          did you get harmonic balancer reinstalled correctly? Opti spark correct and are wires going to correct plugs?
          Well I got a small leak from what it looks like the bottom seal the hub goes into. So no matter what ill be taking it off again. But what do you mean correctly? I just knew that everything needed to be lined up at 12'oclock and I torqued everything to spec.

          Comment


          • #6
            figured out the fan issue today. I bough a new temp sensor and it was DOA apparently so went back to o'reillys and grabbed another one. all is good with that.

            Comment

            Working...
            X