Announcement

Collapse
No announcement yet.

Formula down

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Formula down

    Pulling formula into work today, was on my way to winston speedway on saturday gettn on the highway,lost 4th and 3rd gear gonna rip it out, and see what went bad... hopefully nothing too costly.

  • #2
    Good luck.
    sigpic
    U.S. Army 1983-2005
    11.20@122.37 1.51 60'

    Originally posted by WMCCjames

    "Plans Subject to change upon Sobering up"

    Comment


    • #3
      I'm curious what Trans is in that machine?

      Comment


      • #4
        Originally posted by TORN View Post
        I'm curious what Trans is in that machine?
        Sounds like a blown up 4l60. So.. Getting on the highway huh? I've never seen you get on the highway at less than full throttle. Doesn't like the 3 to 4 shift at wot
        98 z28, m6, monster clutch, eibach pro kit, custom twin turbo setup, 317 heads, z06 valve springs, arp rod bolts, 512rwhp at 10lbs. cobra eater

        Comment


        • #5
          sounds like the 3-4 clutch pack is toast. I wouldn't advise using the Raybestos Z Pak

          1998 Camaro Z28 - Bright Red, 6.0 TR224, 4l60e, 3.42 Eaton TrueTrac
          1989 Camaro IROC-Z Convertible - 355 big tube TPI, WC T5, 3.42 Zexel Torsen, CTS-V/C4 brakes
          1955 Bel Air 2 Door Post - 357 TPI, Muncie M20, 4 wheel disc

          2006 Saab 9-7x 5.3i Daily Driver

          Comment


          • #6
            Ordered rebuild kit from GM, 150$ tearing down trans now, burnt fluid, maybe get some pics up asap. 3rd 4th clutch pack is def. fried and the pcs is asking for 1amp and was getting 0amps which is why i have hard shifts from 1-2 and 2-3.

            Comment


            • #7
              Over and forward clutch piston was cracked, and friction disc were burnt up. parts coming into 2day, and should be put together and in car tonight/tomorrow tryn 2 upload pics at work... not sure if its going to work

              Comment


              • #8
                while putting together tranny, found out it was missing 1steel and 2friction disc for the clutches so someone has been in the tranny before. but goin back together today and on the road tonight and book time calls for 12hrs and i onlhave 3into it so far

                Comment

                Working...
                X