Got a cam to go with my LT's

[farmington]

Picked up a used cam today. Futral Motorsports 226 degree intake and 230 exhaust (at .050 lift) and .575 lift. Got a good deal on it too, so that helps. So now I have to get a set of Comp 918 springs, new pushrods, and start turning the wrenches.

[1BADAIR]

why 918's?
i would get patriot or prc golds

[Formula Z]

918s are better priced for what they are needed for??? as far as i have seen they are just as popular

[BP_Z28]

Ugh..all these topics make me sick.. Damn lansing send my check!!!!

I want to start spending my mod money asap!

[sman]

I would look into some PAC 1518s, cheaper IIRC, and so far have a significantly better reputation than the 918s.....

[c0ncEpT]

918s are better priced for what they are needed for??? as far as i have seen they are just as popular

Because duals aren't that much more.

With the aggressive ramp rates of the lobes used on these high lift cams springs can fatigue and break.

Its cheap insurance. Spend $100 now instead of buying a motor when your single spring drops a valve.

[ThreeHonks]

I've always had good luck with the Patriot Extreme dual spring kit. Those springs are about as dirt cheap as they come too, like $260 with all hardware

[1BADAIR]

golds would be plenty. he wouldnt need extremes and they are cheaper

[ThreeHonks]

golds would be plenty. he wouldnt need extremes and they are cheaper

basically the same difference. only a few dollars more for the better springs

[Superman09]

If you need any parts like valve springs, shoot me a PM and I'll get you whatever you need at a great price! Your O2 extensions will be on the way tomorrow!

[FASHOOTER]

Well, whatever springs you decide to use I'm sure you will enjoy the new cam! Good luck with your build!

[Formula Z]

true that!

[1999Black_Z28]

How soon do you need the springs? I will be selling my PAC 1518's with Ti retainers later this spring when I install my new heads. The springs have less than 3,000 miles on them.

[Detoxx03]

Congrats. You'll enjoy that cam