Announcement

Collapse
No announcement yet.

Thinking about new Sway Bars.

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Thinking about new Sway Bars.

    I have been looking at GM parts site and they list 3 different front and rear sway bars.


    Which one is the best, the reason I am asking is, the ones that say w/ perf option are the cheapest which dosnt seem right to me.

    Anyone have the part numbers for the 1LE
    Attached Files
    sigpic

    1996 Base Model
    +2 cylinder mod

  • #2
    GM 32mm hollow front sway bar part number 26032907
    $50 shippe on ebay

    Comment


    • #3
      Heres the set I'm running.
      http://www.stranoparts.com/partdetai...=125&ModelID=2

      Car corners flatter then yesterdays Beer.
      Craig
      Semi Retired Street Racer
      2012 Lava Red Mustang GT 5.0 MT82
      GONE BUT NOT FORGOTEN
      sigpic

      NBM `98 Formula M6 HdTp

      1 of 1 Build Date 3/12/98

      "Political correctness is a doctrine, fostered by a delusional, illogical, liberal minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."

      "For you who believe all you read, I caution you - you are daily being brainwashed for profit by extremely effective psychology with very little regard to factual accuracy. In short, you're at the mercy of the world's greatest bullshit artists with the morals of a stray tomcat."
      - Smokey Yunick

      Comment


      • #4
        http://cgi.ebay.com/ebaymotors/NOS-9...Q5fAccessories





        Thinking this one

        Anyone know the part number on a 1LE rear?
        Last edited by jderry; December 6th, 2009, 05:12 PM.
        sigpic

        1996 Base Model
        +2 cylinder mod

        Comment


        • #5
          who runs a front sway bar?!?

          upgrade the rear one and rip the front one off
          Last edited by ThreeHonks; December 6th, 2009, 05:49 PM.

          Comment


          • #6
            Originally posted by ThreeHonks View Post
            who runs a front sway bar?!? :thumbs down:

            upgrade the rear one and rip the front one off

            People who drive their cars in anything but a strait line =)
            sigpic

            1996 Base Model
            +2 cylinder mod

            Comment


            • #7
              Originally posted by ThreeHonks View Post
              who runs a front sway bar?!? :thumbs down:
              -Joel
              1995 Z28 M6 - AI226/234 - autocross ricer
              1984 Scottsdale K10 - 305/4bbl/4spd


              WTB List:Midwest Chasis DS Loop

              Comment


              • #8
                I'll rip it off secretely one day when you're not looking

                Comment


                • #9
                  is a 1LE diff than a WS6?
                  1998 Chevrolet Camaro Z28 - 6 Speed

                  Comment


                  • #10
                    Originally posted by nascarnate326 View Post
                    is a 1LE diff than a WS6?

                    I honestly dont know.
                    sigpic

                    1996 Base Model
                    +2 cylinder mod

                    Comment


                    • #11
                      Originally posted by nascarnate326 View Post
                      is a 1LE diff than a WS6?
                      Depends on what year car. GM started getting cheap in the last years of the 4th gen and started downgrading the WS6/SS suspension.
                      The 98-99 SS's had 1LE suspension with the exception of the Koni D/A shocks.
                      http://www.fquick.com/csmith4153
                      2015 Midnight Silverado Crew Cab
                      2011 Camaro SS
                      1999 Camaro SS #4153
                      1986 Monte Carlo SS
                      1969 Camaro - 427 Rat

                      Comment


                      • #12
                        Originally posted by csmith4153 View Post
                        Depends on what year car. GM started getting cheap in the last years of the 4th gen and started downgrading the WS6/SS suspension.
                        The 98-99 SS's had 1LE suspension with the exception of the Koni D/A shocks.
                        I believe the 1LE cars also had a 21mm rear swaybar and harder durometer bushings. The WS6 SS cars did not get the bushing nor the 21mm rear bar.
                        Jan 2000 was the cutoff point for the availability of the 1LE suspension option. So all WS6/SS Cars made after that point are equipped with the same springs as the regular V8 Cars, the rest of the Pkg remained the same (bigger wheels/tires 32mm front swaybar different valving Decarbon shocks). BTW the 32mm front bar is same as 1LE.
                        Craig
                        Semi Retired Street Racer
                        2012 Lava Red Mustang GT 5.0 MT82
                        GONE BUT NOT FORGOTEN
                        sigpic

                        NBM `98 Formula M6 HdTp

                        1 of 1 Build Date 3/12/98

                        "Political correctness is a doctrine, fostered by a delusional, illogical, liberal minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."

                        "For you who believe all you read, I caution you - you are daily being brainwashed for profit by extremely effective psychology with very little regard to factual accuracy. In short, you're at the mercy of the world's greatest bullshit artists with the morals of a stray tomcat."
                        - Smokey Yunick

                        Comment


                        • #13
                          Originally posted by 9T8W66 View Post
                          I believe the 1LE cars also had a 21mm rear swaybar and harder durometer bushings. The WS6 SS cars did not get the bushing nor the 21mm rear bar.
                          Jan 2000 was the cutoff point for the availability of the 1LE suspension option. So all WS6/SS Cars made after that point are equipped with the same springs as the regular V8 Cars, the rest of the Pkg remained the same (bigger wheels/tires 32mm front swaybar different valving Decarbon shocks). BTW the 32mm front bar is same as 1LE.
                          Your correct on the rear sway bar. I had to look in my binders that has info on the SS's

                          The 1LE did come back in 2001 & 2002 as a SLP option on the SS's.
                          The SLP 1LE cars had a 35mm hollow front bar.
                          http://www.fquick.com/csmith4153
                          2015 Midnight Silverado Crew Cab
                          2011 Camaro SS
                          1999 Camaro SS #4153
                          1986 Monte Carlo SS
                          1969 Camaro - 427 Rat

                          Comment


                          • #14
                            Im guessing bigger diameter sway bar means i need bigger bushings, which ones do i get, does energy sespension make any, i havent bought anything of theirs i didnt like
                            sigpic

                            1996 Base Model
                            +2 cylinder mod

                            Comment


                            • #15
                              They usually come with bushings I think, mine did.
                              1999 Camaro - 6 liters of fury.....

                              Comment

                              Working...
                              X