i think this week was the best week ever... i ended up picking up a brand new LT4 kit for my car. i saw the posting on craigslist so i called the guy and it sounded legit, so i drove down there to find brand new LT4 heads, Intake, hotcam, rollerrockers, ect. everything i needed to convert mine into the lt4.. i even got a brandnew lt4 timing chain,8 brand new fuel injectors that are 28 lbs apiece, brand new oil pain, and a holley tb thats been ported and what not.. like i said this stuff was right off of a GM LT4 and was only test fired at GM.. anyways i got everything for 1000
i couldnt believe it!!!! but now i am just looking for a corvette LT1 block so i can have the 4 bold mains, and then i can start building a new lt4 383.. so i just thought i would show everyone what i purchased and if you have any suggestion for the motor/383 kit? any parts you guys would recommend for me?
Announcement
Collapse
No announcement yet.
Steal of a Deal! LT4
Collapse
X
-
Nice Pick up
CraigSemi Retired Street Racer2012 Lava Red Mustang GT 5.0 MT82GONE BUT NOT FORGOTEN
sigpic
NBM `98 Formula M6 HdTp
1 of 1 Build Date 3/12/98
"Political correctness is a doctrine, fostered by a delusional, illogical, liberal minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."
"For you who believe all you read, I caution you - you are daily being brainwashed for profit by extremely effective psychology with very little regard to factual accuracy. In short, you're at the mercy of the world's greatest bullshit artists with the morals of a stray tomcat."
- Smokey Yunick
Comment
-
Nice job man! $1000 is a steal.- Brian Meissen
Owner, MiFBody.com
Administrator, LTxTech.com

1994 Camaro LT1 Transplant -
357ci LT1, cammed, stalled, and driven. 
2022 Camaro LT1 - "Cherry Bomb 2"Michigan FBody Meet & Greet Car Show 2022
June 4th, 2022 - 9am to 3pm!!!
The HUB Stadium, Auburn Hills, MI
Comment
-
pffft 383, get the new dart block and build a 427
nice pickup!-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
Im with Joel 427! 427!Originally posted by JoeliusZ28 View Postpffft 383, get the new dart block and build a 427
nice pickup!2011 Ford Raptor SuperCrew
SVT Beadlock Wheels
Roush Intake, Corsa Exhaust
20" and 40" Light Bars
2000 Camaro Z28
Stripped Down Drag Car Build
Project 1999 Camaro Z28
2009 G8 GT Stryker Blue Metallic-SHEGONE
Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
RotoFab Intake, HSRK, Camaro Trans Pan
ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
Pat G - 93 Octane Tune
Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
CTS-V Calipers, Brembo Pads
H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband
2.55 Lingenfelter Pulley and Injectors waiting to go on!
sigpic
Comment
-
Dr LT1
- March 8th, 2007
- 8278
- Kyle L
- 1993 Pontiac TransAm V8
- Hudsonville, Michigan
- Machinest/CNC Programer
- Send PM
Depends on how much pwr you want to make but I would go with the H-beams & forged pitons.
Nice pick up BTW.
VicePresident of West Michigan Firebird Club
A.K.A The Maverick
http://www.cardomain.com/ride/660128/1
93 TA Currently Under Construction AGAIN
2007 2500 Chevy Silverado Crew Cab w/ 6.0L & 3.73's
Comment
-
Lance told me about this the other day, GREAT deal! Now i've gotta plan my next mod so i'm not looking at your tail lights all the time....sigpic1994 Camaro Z28 83K M6, CAI, AFR 190cc, 11.6:1, Hooker headers, Hooker ORY, Mangnaflow exhaust, AI 230/238, 1.6 RR, B&M Short throw, Hays clutch, 4.10 gear.
Member: The Mid Michigan Modern Muscle Car Club
manuals should be launched off the limiter and the throttle shouldn't leave the floor til 10 feet after the finish line
Comment
-
Btw, a splayed 2-bolt main block, is stronger than a stock 4-bolt block.sigpic1994 Camaro Z28 83K M6, CAI, AFR 190cc, 11.6:1, Hooker headers, Hooker ORY, Mangnaflow exhaust, AI 230/238, 1.6 RR, B&M Short throw, Hays clutch, 4.10 gear.
Member: The Mid Michigan Modern Muscle Car Club
manuals should be launched off the limiter and the throttle shouldn't leave the floor til 10 feet after the finish line
Comment
-
Dr LT1
- March 8th, 2007
- 8278
- Kyle L
- 1993 Pontiac TransAm V8
- Hudsonville, Michigan
- Machinest/CNC Programer
- Send PM
True!Originally posted by Bad_Z28 View PostBtw, a splayed 2-bolt main block, is stronger than a stock 4-bolt block.
I have the factory 4 bolt and when you use studs in the bottom end they will take some punishment.
VicePresident of West Michigan Firebird Club
A.K.A The Maverick
http://www.cardomain.com/ride/660128/1
93 TA Currently Under Construction AGAIN
2007 2500 Chevy Silverado Crew Cab w/ 6.0L & 3.73's
Comment






Comment