Best place for these parts

[mikek18]

I am wondering where the best place to find some parts is.

I need the egr blockoffs for header install and matching gaskets

i also need header gaskets and bolts.

[ICEPICK]

ebay is a good place

[my95z28]

CS3 Automotive/ Creight is where I would check first

[meissen]

Check with Creight first for sure, if he doesn't I know ebay does.

[Phantom409]

Ebay for the EGR plates.

Keep it local and Automasters can get good gaskets for the headers and collectors, see John, he'll just look up what I have and give it to ya
The Alum. dead soft gaskets are the best IMO for the collectors

The EGR, just use Ultra Black RTV for a gasket

[mikek18]

also need 02 extensions if creight sees this

[sman]

I heard the factory GM gaskets and bolts were one of the best to use.

[Virtue]

I heard the factory GM gaskets and bolts were one of the best to use.

ive done that with about 4 header swaps now.... use loctite if need be

honestly i got some header bolts when i bought my new 1 7/8in headers for my camaro the bolts were garbage and almost stripped out one of my threads on the head.

[mikek18]

Thanks for the input guys.

[mikek18]

next questionis do i need to replace my plug wires. i just put on brand new 8.5 msd super conductor wires last summer.

[sman]

Not unless there bad? I guess it would depend on the boot style too, but even then I would imagine it wouldnt be an issue.

[Phantom409]

next questionis do i need to replace my plug wires. i just put on brand new 8.5 msd super conductor wires last summer.

Na, those are good yet.

[LS1Phoenix]

DON'T USE A BLOCK OFF DUDE! I had one on my shit...Blew the whole thing right off...if you're not using it, cut it off now and weld the hole. Cost me $300 just to get the header taken off and weld the hole shut.

[meissen]

Or just buy long tubes.

[Phantom409]

He does have long tubes, that's why he is asking.

As far as block off plates, I have been running them on my car for years with no problem and so have millions of LT-1 peeps.