Rear Squat Advice...

[LS1Phoenix]

I would like to upgrade my rear suspension. I would like to know what the best set up would be to reduce or eliminate the rear squating on take off's. Or just let me know what you have and how well it works. Thanks!

[1BADAIR]

instant center-
relocation brackets and a torque arm that has an adjustable front mount

[DETROITMUSCLE]

in other words call Madman

[LS1Phoenix]

Ok, I was actually looking into the reloc. brackets, new LCA's, Panhard, and the adj. Torque arm...I just have no idea about the adjusting part. I don't know where it should be set for best results.

[1BADAIR]

umi has two sets of holes, I use a long BMR with the front mount relocation bracket. the short TA are set for a better IC from the factory so most are not adjustable.
Short Ta's do have issues if you plan on doing road race or auto cross though.
I try to run 3-4 degree's of down angle on the LCA's

[LS1Phoenix]

umi has two sets of holes, I use a long BMR with the front mount relocation bracket. the short TA are set for a better IC from the factory so most are not adjustable.
Short Ta's do have issues if you plan on doing road race or auto cross though.
I try to run 3-4 degree's of down angle on the LCA's

Well I doubt I'll be doin any road race or auto cross, so I found one that's fairly cheaper. Let me know what you think about it. Also, you wouldn't happen to have a picture of your setup, would you?
http://www.lmperformance.com/18595/1.html

[meissen]

Go with Creight, he'll do you up.
http://cs3automotive.com/index.php?a=PROD:1021

[1BADAIR]

I just have the trans mounted adjustable bmr with it relocated to this crossmember. I have used the short arm you posted with good results on other cars too.

[csmith4153]

Well I doubt I'll be doin any road race or auto cross, so I found one that's fairly cheaper. Let me know what you think about it. Also, you wouldn't happen to have a picture of your setup, would you?
http://www.lmperformance.com/18595/1.html

I can also get you that arm. Feel free to send me a pm and I can help you pay some of the sales tax.
http://cs3automotive.com/index.php?a=PROD:1570