Dan's 1997 Camaro, aka project "NYTRDR"

[DanDalessandro]

Slp ultra z

[birdie2000]

Just a suggestion, but swing by Clutch Masters in Warren. They took my Competition Clutch stage 2.5 and relined it although they build clutches from scratch too. Did a good job and it held up really well for the time I had it. Bunch of older guys and they were pretty reasonable price-wise. Told them my goals, told me what they were going to do, and everything came out exactly like they said it would.

Just another option to consider, plus local support is never a bad thing.

[DanDalessandro]

[DanDalessandro]

^new motor. Forged 383.

[JoeliusZ28]

I know you arent always serious and i hope thats the case here. 383 with stock stamped rockers = ya done goofed.

[DanDalessandro]

I know you arent always serious and i hope thats the case here. 383 with stock stamped rockers = ya done goofed.

Picture of my cousins old motor. Those rockers were replaced. Just messin' around and needed to use that last photo [emoji38]

[mcalus]

Yep so if I were you get to pulling that motor. Do everything while its out. Clutch, heads, cam etc...

[Darren]

Picture of my cousins old motor. Those rockers were replaced. Just messin' around and needed to use that last photo [emoji38]

And you wonder why people don't check this thread. Turns out to be a waste of time.


Sent from my iPhone using Tapatalk

[DanDalessandro]

And you wonder why people don't check this thread. Turns out to be a waste of time.


Sent from my iPhone using Tapatalk

Lol thanks man.

[DanDalessandro]

Yep so if I were you get to pulling that motor. Do everything while its out. Clutch, heads, cam etc...

I'm likely only doing the clutch this winter/spring. Comp clutch stage 4 looks to be winner winner chicken dinner. But I totally agree, pull it once and be done. Thank you for positive vibes!

I'll be sure to update when I get my clutch.

[Darren]

Lol thanks man.

well when you post so many pointless things and motors that arent even yours... and you ask why?

[DanDalessandro]

well when you post so many pointless things and motors that arent even yours... and you ask why?

Hey man I get it. I'm stupid, childish, and ignorant. You don't need to tell me homie.

[Darren]

Hey man I get it. I'm stupid, childish, and ignorant. You don't need to tell me homie.

Just some friendly unwanted advice I see that you dont care, so post up another motor you dont have!

[MeenZ28]

I mean, if you're going to lie, go all the way...

[DanDalessandro]

I'm in the process of making a buy that will make my car more reliable.

It's already reliable, it's just that what is involved will replace a few leaky seals.