#18

[BP_Z28]

Well damn..those look good on there!

Well like I said if Fred doesn't pick up the sfc lmk

Sent from my C811 4G using Tapatalk

[bri2203]

Thanks Fed Ex! These bracket will allow me to install 12.8 C5 Corvette Brakes(stock is 12")
Who want to upgrade their LT1 brakes to LS or 3rd gen guys?photo (30).JPG

[bri2203]

This morning I modified an extra set of spindles for the brake upgrade and mocked up the set up on the bench.
Adjustable panhard bar installed
012.JPG
Antenna Delete
006.JPG
Rear lower springs installed
023.JPG

[bri2203]

I made some more progress yesterday.

-Repaired the DR window regulator, and removed all of the wiring.
-modified LS Knuckles- shot blasted and ready for paint.
148.JPG
Window tint delete and defroster harness delete
149.JPG
Hatch interior plastics removed. Currently looking into spoiler designs to add down force.
150.JPG

[BP_Z28]

Im dying to know the weight when its all said and done!

[bri2203]

Well #18 lost some more weight today but it will be putting it all back on plus some in the next week.
Removed- Spare tire hold down bracket, rear seat belt brackets, rear lower seat brackets, interior trim brackets etc. Totaling 4 lbs 4 oz001.JPG002.JPG007.JPG
Tow hooks to be mocked up this week.009.JPG
C5 Corvette Brakes are ready to be installed 012.JPG

[bri2203]

While upgrading the front brakes I found that the outer ties rods needed to be replaced. New tie rods and new brakes

[JoeliusZ28]

Looking real good!

[MunsterZ28]

following! looking good brian, more and more of us trying to take corners in our fbodys these days. i do support

[bri2203]

012.JPG

[bri2203]

Lock it up! Another car dismantled and sold.

The body will be a race car eventually. I kept a handful of parts for my current project.