A good exhaust - block to tips - will set you back around a thousand bucks.
Announcement
Collapse
No announcement yet.
STARTING TO ADD HORSE POWER NEED HELP
Collapse
X
-
Post Slut
- December 9th, 2011
- 5919
- Michael H
- 1989 Iroc-Z Convertible/1998 Z28
- Lowell, MI
- Meat Processor
- Send PM

1998 Camaro Z28 - Bright Red, 6.0 TR224, 4l60e, 3.42 Eaton TrueTrac
1989 Camaro IROC-Z Convertible - 355 big tube TPI, WC T5, 3.42 Zexel Torsen, CTS-V/C4 brakes
1955 Bel Air 2 Door Post - 357 TPI, Muncie M20, 4 wheel disc
2006 Saab 9-7x 5.3i Daily Driver
-
-
Lurker
- March 13th, 2010
- 3476
- TJ
- 1995 Chevy Camaro Z28
- Clinton Twp Michigan
- Powerline Tree Trimmer.
- Send PM
I live in Clinton twp and have the tuning software.Originally posted by Yoshi94Mines about an inch bigger than Kyles. I need to get one of thosesigpicOriginally posted by ryanwarby01Put it this way, if you have a money tree a LT1 is a wood chipper!
Comment
-
The best bang for the buck on my old 4th gen were drag radials, 3.73 gears, under drive pulleys and a Dyno tune.
If i could do it again I would say Save your money on all that other crap. If you want to go fast, find an lt4 cam and heads and take that to a reputable shop. Have it Dyno tuned. Get a good stall converter and trans cooler. Drag radials. Own mustangs. Do it right the first time.
Comment
-
What would it take to change my Speedo for my gears??Originally posted by Fox Slaughter View PostI live in Clinton twp and have the tuning software.
Sent from my Pantech Breakout using Tapatalk
Comment
-
Lurker
- March 13th, 2010
- 3476
- TJ
- 1995 Chevy Camaro Z28
- Clinton Twp Michigan
- Powerline Tree Trimmer.
- Send PM
Less than 5 mins.Originally posted by OneMeanFormula View PostWhat would it take to change my Speedo for my gears??
Sent from my Pantech Breakout using Tapatalk
Gears 4.10 for manual.
3.73 for auto.
You can gain extra ponies by doing a valve trainswap. I mean by switching out your rockers to 1.6 and springs.
Dont get underdrive pulleys.
Free mod remove weight.
I removed 80lbs so far between the AC and the spare tire/jack.Last edited by Fox Slaughter; August 22nd, 2012, 09:36 PM.Originally posted by Yoshi94Mines about an inch bigger than Kyles. I need to get one of thosesigpicOriginally posted by ryanwarby01Put it this way, if you have a money tree a LT1 is a wood chipper!
Comment
-
Anything as far as money??Originally posted by Fox Slaughter View PostLess than 5 mins.
Gears 4.10 for manual.
3.73 for auto.
You can gain extra ponies by doing a valve trainswap. I mean by switching out your rockers to 1.6 and springs.
Dont get underdrive pulleys.
Free mod remove weight.
I removed 80lbs so far between the AC and the spare tire/jack.
Sent from my Pantech Breakout using Tapatalk
Comment
-
Lurker
- March 13th, 2010
- 3476
- TJ
- 1995 Chevy Camaro Z28
- Clinton Twp Michigan
- Powerline Tree Trimmer.
- Send PM
PM me.Originally posted by OneMeanFormula View PostAnything as far as money??
Sent from my Pantech Breakout using TapatalkOriginally posted by Yoshi94Mines about an inch bigger than Kyles. I need to get one of thosesigpicOriginally posted by ryanwarby01Put it this way, if you have a money tree a LT1 is a wood chipper!
Comment

Comment