Project Panther

[BP_Z28]

If its going to be a permanent block-off, use some exhaust gasket material to seal it. Nothing more annoying than an exhaust leak. I think they sell it in sheets so you can cut it to shape.

Yea thats what I am going to do. Does it matter what gasket I get? Certain brand I should buy maybe?

Good luck reaching dmh... I gave up..

Yea, it sucks. Havn't gotten ahold of him yet. Already pissing me off. A guy on ls1tech posted a week ago or so about ordering a new motor and doing the work himself. Took the cutout off car. Drilled rivets..new motor from a different company, and new plate..Only cost him $60, so that might be less of a headache than trying to reach this guy.

Heard about people actually getting ahold of him. DMH telling people to send the cutout to him and he will warrant. And the customer not getting their cutout back for 4+ months. Shitty!

[BP_Z28]

Should probably race a poor little LT1.

Lapeer?

[Fox Slaughter]

We can. I still have some break in left and then for the slicks I will have to cut the bumper to give room for slick growth.

[BP_Z28]

Re: Project Panther- Sniper Performance build

sounds good!

Sent from my DROID4 using Tapatalk 2 because Apple sucks

[Fox Slaughter]

Been to the track before? Know what times you laid down?

[Nocooler]

Rolo - just lay a nice bead of permatex copper on it and then let it dry before you put any exhaust on it.

[BP_Z28]

Best I ran was a 12.7 marked to date on the forum...same bolt ons..roasted drag radials.my sh*t is weak...but I am feeling a bit lucky this year

[Fox Slaughter]

Best I ran was a 12.7 marked to date on the forum...same bolt ons..roasted drag radials.my sh*t is weak...but I am feeling a bit lucky this year

Was that set at Lapeer?
Best was 13.8 last year, on street tires.

This year it will be 2 step, slicks/training wheels, full suspension.
I think you'll still get me but should be a good one.

[BP_Z28]

Yep, never been down a drag track until last year. Ran the car with my 245's and ran as 12.9..then the retired radials I put down 12.7..All my runs were at Lapeer.

Still going to use those radials until I get a new set or used set.

[Fox Slaughter]

Forgot I also have 4.10s now and will be launching the piss out of the car haha.

[BP_Z28]

Maybe Me, You,and Eric can get the races done the same day?

[Fox Slaughter]

Haha. Possibly.

Is there any LT1s that wanna race? Haha I'm taking on LS1s.

[erk2581]

If my car were any slower I'd be allowed to take my helmet off and have a passenger ride shotgun at Milan.

[BP_Z28]

Rolo - just lay a nice bead of permatex copper on it and then let it dry before you put any exhaust on it.

dumb question but would I have to reapply it when I take the plate off? Most likely on a track day I will crawl under the car and take the plate off. Or maybe on a cruise night.

[Nocooler]

dumb question but would I have to reapply it when I take the plate off? Most likely on a track day I will crawl under the car and take the plate off. Or maybe on a cruise night.

Yes - sorry, I thought you were just looking for a temporary solution. If you are going to be removing the plate - then make a gasket.