<Project> 1996 Trans Am WS6

[JoeliusZ28]

This car couldn't have found a better home! Can't wait to see what you do with it. When you say starting out with an sbc, do you mean carbed? Or are you going to stick another lt1 in it? If I were you I'd do it once and do it right. Maybe use an engine that's boost ready without boost to start. Also speaking from experience, auto cross doesnt require a lot of horsepower... My car succeeded at being a crowd pleaser way more than it did at running respectable times

[JoeliusZ28]

http://www.motownmuscle.com/forums/s...00-6.0l-engine

[jetice]

This car couldn't have found a better home! Can't wait to see what you do with it. When you say starting out with an sbc, do you mean carbed? Or are you going to stick another lt1 in it? If I were you I'd do it once and do it right. Maybe use an engine that's boost ready without boost to start. Also speaking from experience, auto cross doesnt require a lot of horsepower... My car succeeded at being a crowd pleaser way more than it did at running respectable times

I would be starting with a Gen I small block, pending my grandfathers involvement. I think a methanol-injected roundy-round engine in an auto-x/road track car would be just a little bit of fun. If he doesn't get involved I will probably just do a mild gen I sbc build and build up my turbo motor on the side. I would like to start a ways from my goals so I have so place to build to for years. I don't want to be one of those people that build a car exactly how they want it the first time, then get bored with it and sell it.

http://www.motownmuscle.com/forums/s...00-6.0l-engine

Hehe, I will have to check with my dad. He said that he found a place that sells take-out ls engines with all accesories and computer for $1500-2000. He hasn't showed me it yet, and until he does, I am going to keep thinking he is blowing smoke out his azz

[2002Z4CSS]

That car is shiney!

[JoeliusZ28]

I would be starting with a Gen I small block, pending my grandfathers involvement. I think a methanol-injected roundy-round engine in an auto-x/road track car would be just a little bit of fun. If he doesn't get involved I will probably just do a mild gen I sbc build and build up my turbo motor on the side. I would like to start a ways from my goals so I have so place to build to for years. I don't want to be one of those people that build a car exactly how they want it the first time, then get bored with it and sell it.



Hehe, I will have to check with my dad. He said that he found a place that sells take-out ls engines with all accesories and computer for $1500-2000. He hasn't showed me it yet, and until he does, I am going to keep thinking he is blowing smoke out his azz

Yea let me know when you find that site, I've got an ls1 ski boat to build

[jetice]

You can thank this ^ man right here for that. He has worked his magic on this car more than once.

That car is shiney!

[OVRKILL]

Too soon to derail the direction of this thread?

A little more exterior help for ya Jentry....keep those salad shooters and protect them with a set of these!






















sorry....couldnt help it. looks like a cool project

[Fbomb]

Yup, was this || close to getting a set of good looking temporary 18's for it

lol

[jetice]

Too soon to derail the direction of this thread?

A little more exterior help for ya Jentry....keep those salad shooters and protect them with a set of these!

sorry....couldnt help it. looks like a cool project

Curb feelers!!! Or they could be body roll indicators

And thanks

lol

Forgot about Larry's, different set. These were cheap but Mr. Makeaquickbuck up there snatched them up before I could

[jetice]

jentry the cars at your grandpas in bfe? cause you dont live that far i thought

Sorry I missed this, but it is at my parent's house 30 miles north of Lansing, about two hours from sterling heights.

[jetice]

Yea let me know when you find that site, I've got an ls1 ski boat to build

Dad just emailed me this link
http://www.ebay.com/itm/Chevy-6-0-LS...sories&vxp=mtr

[Darren]

There is a 6.0 on CL for $600

[jetice]

There is a 6.0 on CL for $600

Don't tempt me!!!! Lol, can't afford it at this moment.

[Darren]

Don't tempt me!!!! Lol, can't afford it at this moment.

only 30k on the clock too. Here is the link for more temptation. http://detroit.craigslist.org/okl/pts/2722266931.html

[TylerT/AZ28]

yeah id like to check that out as well