[Project] It has begun......Heads/Cam

[Nocooler]

The parts:
Racetronix fuel pump + hotwire - installed last summer
ASA/GTP injectors - installed last summer
Patriot stage 2 cnc'd 243 heads 64cc
Speed Inc SI5 camshaft - 231/237 .589/.595 112lsa
Comp pushrods
LS2 Chain
LS6 oil pump
Poly motor mounts
gaskets, bolts and all the shit needed to put it back together
Tuning by me - debating on 1bar SD

Goals - I'd like to run somewhere in the 120-125mph range full weight, in good air. Speed Inc typically sees 420-450rwhp out of this combo depending on the drivetrain. I've got a good solid running bolt-on car and it's begging for some more power - it should be fun.

So far I have removed the intake, coil, radiator (what a *****) and the water pump.

[DETROITMUSCLE]

its a pretty straightforward swap. If I may throw out a good idea once the waterpump is off take a shop-vac and suck out the coolant in the heads, this will save you from having to clean out the coolant from all the head bolt holes later on.

[Nocooler]

its a pretty straightforward swap. If I may throw out a good idea once the waterpump is off take a shop-vac and suck out the coolant in the heads, this will save you from having to clean out the coolant from all the head bolt holes later on.

Thanks - that was the plan

[shawnc16]

wow an ls build without an MS3 cam? Amazing. Nice pile of parts, that car should move!

[c0ncEpT]

Very nice Jeremy. SI5 is a great cam for stock casting heads.

[Formula Z]

good luck! need any help or just someone to watch and drinks some beers lmk. im originally from mt pleasant so i can find alma pretty easy lol

[Gregs_gsxr]

[Nocooler]

shawnc16

wow an ls build without an MS3 cam? Amazing. Nice pile of parts, that car should move!

Thanks - I considered bigger, but the SI5 seems to fit. I also considered a TV2, TV3, TRAK, and a custom 231/235 LSL lobes on a 110LSA from Predator Z. After talking to Speed Inc, Larry and Tony earned my business.

c0ncEpT

Very nice Jeremy. SI5 is a great cam for stock casting heads.

Thanks - that was the plan a well round combo I wasn't planning on running Patriot heads but I got a smoking deal on some new ones.

Formula Z

good luck! need any help or just someone to watch and drinks some beers lmk. im originally from mt pleasant so i can find alma pretty easy lol

Thanks for the offer - considering my accident and such, I'm only able to work on it for an hour or 2 at a time before I get sore/tired. I'd hate for you to make the trek and me to poop out on you. I've got my brother and dad on call if I need them as well.

[Nocooler]

I'll see what I can do tonight......

[OIF1VET]

Good luck with your build dude!!

[sman]

Why a SD tune?

[Nocooler]

Why a SD tune?

Why not - it'll be more consistent and may gain a few hp. It's not like my car is a DD.

[Nocooler]

DSCF0055.jpgDSCF0057.jpgDSCF0052.jpgDSCF0048.jpgDSCF0050.jpgDSCF0053.jpgDSCF0054.jpgDSCF0049.jpgDSCF0051.jpg

[Formula Z]

nice! some go faster goodies

[Detoxx03]

Nice looking setup. Can't wait to see results