[Project] another cc306 help

[7milez28]

ok so i have decided to go with the cc306 i have the cam but i got 986-16 valve spring can i use those? i also got a new timing set comp roller tip rockers, lt4 lifters all that is left is figure out what valve springs i need and what pushrod length... i need some help guys

[JoeliusZ28]

pushrod length should not change but should always be checked anyway. the stock size is 7.2"

I recommend PAC 1218 or 1518(same thing nitrided). Im running the 1218s in my car.

[sman]

Its like a 50 dollar difference between the 1218s and 1518s, I went with the 1518s. Good to .650 lift, .050 more than the 1218s.

Whats the lift on the cc306?

[JoeliusZ28]

.544/.575 are the numbers i found. My cam is .575/.575 and the 1218s have been great.

[sman]

Oh thats all? 1218s should be fine then.

[MunsterZ28]

.544/.575 are the numbers i found. My cam is .575/.575 and the 1218s have been great.

with 1.6rr?

[JoeliusZ28]

yep