1999 Z28 Camaro (winter to do list)

[mcalus]

Got the exhaust all hooked up!





I tried to get some pictures on my camera but it was dead

So it some more top quality camera phone pics. But I will get new ones!

I had to get a pipe bent so my bullet would connect to the over the axle pipe.

I started with a 45 degree angle


It wasn't enough so I took it back and got a 70 degree angle. Worked perfect



I have one small leak at where the left pipe connects in the middle to the other pipe. I am going to get another band clamp instead of those horrible u clamps. Then I will have band clamps throughout the whole system

[mcalus]

Next week I will be installing the LCA's and relocation brackets. After that will be pulling the computer to get it tuned by Frost!

I think I am going to buy this today! Should I get red or black? Hmmm decisions decisions.
http://www.foundersperformance.com/p...-Bushings.html

[Lucky SOB]

Next week I will be installing the LCA's and relocation brackets. After that will be pulling the computer to get it tuned by Frost!

I think I am going to buy this today! Should I get red or black? Hmmm decisions decisions.
http://www.foundersperformance.com/p...-Bushings.html

I bought it in red and I love it. Very easy to adjust on the car. See my thread "project 2000 trans am" for installed pictures

[mcalus]

I bought it in red and I love it. Very easy to adjust on the car. See my thread "project 2000 trans am" for installed pictures

Okay, how do you like there products? You are the one that I had seen their company in some post (dont remember which one).

[Lucky SOB]

Okay, how do you like there products? You are the one that I had seen their company in some post (dont remember which one).

Well, so far they look great on the car.... it's sitting on jack stands until April Customer service was great also. Here's a picture of the goods

[white97z28]

Got the exhaust all hooked up!





I tried to get some pictures on my camera but it was dead

So it some more top quality camera phone pics. But I will get new ones!

I had to get a pipe bent so my bullet would connect to the over the axle pipe.

I started with a 45 degree angle


It wasn't enough so I took it back and got a 70 degree angle. Worked perfect



I have one small leak at where the left pipe connects in the middle to the other pipe. I am going to get another band clamp instead of those horrible u clamps. Then I will have band clamps throughout the whole system

Is that a slp lm1 cat back?...

[mcalus]

sorta, the over the axle back is, but it has a dynomax bullet instead.

[my95z28]

we shall call it... dynomouth!

[white97z28]

sorta, the over the axle back is, but it has a dynomax bullet instead.

The reason i ask is i have been looking for a cat back like the slp lm1 w/o the muffler forever...i have a dynomax bullet on my car now and i need pipes for over the axle and out the back...im just curious where you got your pipes from?

[MunsterZ28]

i miss my lm1


nice progress!

[mcalus]

The reason i ask is i have been looking for a cat back like the slp lm1 w/o the muffler forever...i have a dynomax bullet on my car now and i need pipes for over the axle and out the back...im just curious where you got your pipes from?

You will have the same set up I have then. I got it off a member on LS1tech. I just made a wanted thread. I got it for dirt cheap. It was 100 bucks shipped. I was looking at Corsa clones that were $150 bucks! Then I got this for 100. I think I made out pretty well. I made a wanted thread and a guy pm'ed me within a day or 2.

[white97z28]

You will have the same set up I have then. I got it off a member on LS1tech. I just made a wanted thread. I got it for dirt cheap. It was 100 bucks shipped. I was looking at Corsa clones that were $150 bucks! Then I got this for 100. I think I made out pretty well. I made a wanted thread and a guy pm'ed me within a day or 2.

Damn i might have to do that lol

[mcalus]

Don't mind the dirt. I live on a dirt road and its my rust preventor













After messing around with the lca relocation brackets and lcas I have spent some quality time under the car and been "checking" things out. Its actually really clean under there (rust wise) the only rust I noticed was on the phb which wont be there for long

[white97z28]

looking good man...you really make me wish my exhaust was finished lol

[mcalus]

looking good man...you really make me wish my exhaust was finished lol

Thanks, I bought the car with a flowmaster on and read how shitty they were so I took it of a few months later. So then I had stock manifolds, stock catted y, dumped.... no muffler. Sound meh... Then after 2 years of that I got LT's, ORY and dumped cherry bomb, yack..... Got the dynomax... Dumped.... Much better. Now I finally have it ran out back after 3 years of dumped exhaust.