3rd gen engine build up

[TB2]

What kind of duration are you running with that cam? That and your rearend gear will play a big factor into what converter you run. When your ready for a converter make sure you contact site sponsor Riddings Automatics. Mike does great work. He set me up great!

[groundedracer]

it is the edelbrock performer RPM cam

Duration at 0.050" Lift:Intake: 234°Exhaust: 244° Lift at Cam:Intake: 0.325"Exhaust: 0.340" Lift at Valve:Intake: 0.488"Exhaust: 0.510"Timing at 0.050"

I think the rear end is a 3.42:1 that is what the guy I bought if off said but I after the new engine is instaled I think I am going with 373

[groundedracer]

Well I was thinking about selling the car but I got a itch for some extra speed and bought a short block 383 from my dads friend. I put the edelbrock performer rpm cam in it got some larger heads and had them ported by superior in kimball and put a pete jackson gear drive in it. toped off with a performer rpm intake and 750 carb I just finished it today I am hopeing to fire it up tomarrow evening just have to put the plugs and wires on it. I will be running it for the first time with headers only because I lost one of the collectors it should be here sunday.

Next in line is a torque converter I wil post pics and a sound clip saturday

[bigjon88]

sounds like a nice car is coming along i cant wait for pictures..

[groundedracer]

just finished her up here are some videos they suck becasue they are from my phone but hte car is done now

[bigjon88]

sounds nice man!!!!

[Darren]

Sounds great!

[groundedracer]

thanks it sound very mean in person wish I didnt need a exhaust but it should be hooked up this weekend it took me longer than I wanted but its worth it now cant wait to drive it now