Announcement

Collapse
No announcement yet.

Blue_Thunder

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • [Project] Blue_Thunder

    Well hopefully this winter I can get a lot done, I at least need a new T-top bar and weatherstripping, and a rear end. And when I do the rear end I can replace the fuel pump with a better high performance one and get a new fuel pump sending unit so my gas gauge works. I will also be doing a complete exhaust, hedman longtubes with a custom 3" x-pipe with bullit racing mufflers. And I will be doing some much needed electrical repairs to fix all that was done wrong on this car :sigh:. And if I still have money I will try and fix my small trans leak.

    1989 Stock L98, Holley Stealth Ram intake, Hooker Headers, GMMG cat-back with cat-delete, #24 Bosch D3 Injectors

  • #2
    Get R Done Jake



    VicePresident of West Michigan Firebird Club
    A.K.A The Maverick
    http://www.cardomain.com/ride/660128/1
    93 TA Currently Under Construction AGAIN
    2007 2500 Chevy Silverado Crew Cab w/ 6.0L & 3.73's

    Comment


    • #3
      Sounds like you have a busy winter ahead!

      Comment


      • #4
        jake i will have a rear end for sale here in a little while its still a 10 bolt but has a posi unit (i think its a eaton) with with 3.73 gears in it that has virtually no noise even with aftermarket gears in it




        Comment


        • #5
          Disc or Drum setup? And how much would you be selling it for?

          1989 Stock L98, Holley Stealth Ram intake, Hooker Headers, GMMG cat-back with cat-delete, #24 Bosch D3 Injectors

          Comment


          • #6
            its drums... but im not sure yet you'll have to throw me an offer cuz i know someone else who may want it too




            Comment


            • #7
              I am definatly interested, Since I have a drum setup now it would be a direct swap, very easy, How much is gary willing to pay/ whats his offer. I would like to get a deal, but i have no idea how much a 10 bolt rear end like yours is worth-

              1989 Stock L98, Holley Stealth Ram intake, Hooker Headers, GMMG cat-back with cat-delete, #24 Bosch D3 Injectors

              Comment


              • #8
                well a ring a pinion will run you about 200-250$ and 10 bolt 100-150. and someone to install the gears anywhere from 300-500. so hes probably got 600-800$ tied up in it. i would offer 300-400$ if it was me b/c its used.

                but this is my opion. lol
                HISTORY OF CARS PAST AND PRESANT (none of them were wrecked)

                1989 S10 standard with 350 carb'd, th350, shift kit, shorties, 600cfm, hooker TD's, 3.23 non posi, B&M shifter(sold)

                1991 firebird with t-tops and 3.1L, 700r4, 3.23 non posi, flowmaster cat back, 15ibs injectors, (sold)

                1991 formula with t-tops, WS6, 5.0TPI, WC T5. 3.42 posi. magnaflow cat back, 52mm TB, and hurst billet (sold)

                1994 camaro z28 with t-tops, 5.7LT1, T56, 3.42 posi. CAI, elbow, Airfoil, SFC, STB, pro 5.0, flowmaster cat back. (sold)

                2000 Trans am with t-tops, 5.7LS1, T56, 3.42posi, LT'S, ORY, magnaflow, lid, lingenfelter intake, 3pt SFC, STB, LCA, (current)

                Comment


                • #9
                  Gary has already bought it, And I would be the one installing the rear end, They are not tht hard to pull on these.

                  1989 Stock L98, Holley Stealth Ram intake, Hooker Headers, GMMG cat-back with cat-delete, #24 Bosch D3 Injectors

                  Comment


                  • #10
                    I am picking up a 10 bolt from a 90 Iroc, It has 2.73 posi in it but I will be getting 3.73s for it. I will but new axle bearings in and rebuild the brakes as well. So all the internals will be new. I can't wait to have Posi in my Camaro.

                    $100 is what I am paying and I get a rear sway bar with it too.

                    1989 Stock L98, Holley Stealth Ram intake, Hooker Headers, GMMG cat-back with cat-delete, #24 Bosch D3 Injectors

                    Comment


                    • #11
                      Crash,

                      are the 2.73's in good shape? I would be interested in them i think.

                      Tim
                      PRO-CRUZ IROC
                      1987 IROC-Z 305 TPI 5 Speed



                      IROC pics http://s276.photobucket.com/albums/kk29/slo-hand/
                      IROC and the bird projects http://www.cardomain.com/id/Slohand

                      Comment


                      • #12
                        Good find Jake!



                        VicePresident of West Michigan Firebird Club
                        A.K.A The Maverick
                        http://www.cardomain.com/ride/660128/1
                        93 TA Currently Under Construction AGAIN
                        2007 2500 Chevy Silverado Crew Cab w/ 6.0L & 3.73's

                        Comment


                        • #13
                          Originally posted by slohand View Post
                          Crash,

                          are the 2.73's in good shape? I would be interested in them i think.

                          Tim
                          The seller does not know how many miles are on them, But when I get the rear end I will take a close look at the Carrier. The seller said they look good. No known issues.

                          I am getting it saturday.

                          1989 Stock L98, Holley Stealth Ram intake, Hooker Headers, GMMG cat-back with cat-delete, #24 Bosch D3 Injectors

                          Comment


                          • #14
                            nice find. no more one wheel peel outs. woot
                            West Michigan Firebird Club

                            www.wmfirebird.com

                            Comment


                            • #15
                              Update- Just got my rear end today!!!
                              3.73s here I come!!!

                              Update- I am looking online at new carriers, Any idea on what spine I have, I am assuming my stock 86 open diff rear end is a 26 spline, But when I look up parts for a 90 Iroc rear end they all come up 28 spline,

                              I am not looking at spending big money, I am looking at strange enginearing pro series carriers right now, I am assuming when they say 3.23s and up that means I can order a larger gear right?
                              http://store.summitracing.com/partde...887+4294925022
                              Last edited by Blue_Thunder; November 15th, 2008, 01:15 PM.

                              1989 Stock L98, Holley Stealth Ram intake, Hooker Headers, GMMG cat-back with cat-delete, #24 Bosch D3 Injectors

                              Comment

                              Working...
                              X