Pacesetter LTs

[Formula Z]

well the ones im looking at getting still have the emissions tube, but I can get that welded or capped right?

[sping012]

Yeah, the simple way is you can just get them plugged. Your getting rid of your air system correct?

[Formula Z]

correct

[sping012]

Yeah if your getting a deal on them, just look for EGR Block off Plates for the headers.

[Formula Z]

sweet, thanks for the help man.

[WMCC SSLS1]

The 01-02 headers are the same as the 98 headers except they do not have an EGR hook-up tubes as GM dropped the EGR system in 01 when they switched from the LS1 intake to the LS6. The AIR connection tubes might be different too if I remember correctly between the years. If you are not hooking the EGR and AIR back up then yes the headers will work. Just get some AIR tube block-off plates and you are good to go. Of course if they are "off-road" or "race" style then it doesn't matter as the extra connections are not there anyway. But then they wouldn't be listed as 01-02 headers they would be listed as 98-02 headers.

AIR block-off plates >> http://www.ws6project.com/user_stor/...14f08b1931dd68

Hope that helps!!

[sping012]

Yep, and you can also get them here....http://www.ls1speed.com/catagory.cfm?catagory=Exhaust

Near the bottom.

[Formula Z]

thanks for all the help guys. I guess im getting myself a new set of headers and ory. that plus the ls6 intake, i will be happy this spring. if only i can find a deal on a stall. thanks again everyone.

[Formula Z]

One more question. What about o2 sensors, how many are there and how many do I need and if the headers dont have bungs, do i have to get them welded on?? guess i should have asked more questions in the beginning. do i need them in the ory also??

[WMCC_Alan_Jr]

If you buy Pacestter's from Texas-Speed Inc. you will automatically get the block off plates. I got some with mine and couldn't figure out what they were until Greg pointed told me. Also the O2 sensors, you're going to need to get the extensions. You only need 2 extensions b/c you don't use the rear sensors. You can either get the simulators, or have the code deleted. Don't bother trying to splice the wires together, it is a waste of time. Spend the extra 25.00 for the extensions. just my $.02

[sping012]

Spend the extra 25.00 for the extensions. just my $.02

Exactly

[Formula Z]

so the pacestters should have o2 bungs there already, just need extensions??

[sping012]

yup pacesetters have them there already, you'll need 2 actual O2's and thats for the fronts...the rears will only need the O2 Sims. And pick up the extensions for the fronts.

[Formula Z]

Thanks. you guys are awesome.

[sping012]

Anytime! I went through the same thing you are when i got mine.