LT1 Cam Selection?

[JoeliusZ28]

OK so this is what I have so far -- what else do I need to account for?

COMP Cams 07-503-8
cc503 Cam
http://store.summitracing.com/partde...8&autoview=sku
$259.95

COMP Cams 1305-16
1.6 Roller Rocker Arms at 7/16in Stud Size
http://store.summitracing.com/partde...6&autoview=sku
$285.95

PAC 1218-16
Beehive LS1 Springs
http://www.pacracing.com/Beehive_Spr...Set_of_16.html
$215.00

Here is what the Advanced Induction kit includes, which would need the same stuff as a 503. It has everything but the timing chain, once again. This will show you why the LT4 kit has an appealing price tag....

# Our Complete LT1 Kit includes the following components:

# Any of our Ai Billet steel cam grinds listed below
# PAC Racing 1218 Ovate-wire Beehive Springs
# CompCams ChromeMoly Steel Retainers
# CompCams 10-Deg Steel Locks/Keepers
# CompCams Hardened Steel Spring Locators
# OEM Quality Steel Jacketed Viton Seals
# K-Line Valve Seal Installation Driver
# ARP 7/16" Pro Series Rocker Studs
# CompCams 7702 Pushrod Length Checking Tool
# CompCams 1305 Pro-Magnum Rocker Arms - 1.6 Ratio
# Ai Hardened & Black Oxided Steel Guideplates
# Ai 4130 One Piece ChromeMoly Hardened Pushrods 5/16" x 7.XX" .080" Wall
# Fel-Pro Gasket Kit - Timing Cover gasket, Water Pump gaskets, and Crank/Opti/Pump drive Seals
# Fel-Pro 1284 Intake Manifold Gaskets w/ RTV.

Cost - $1195

[awp944]

Yea Joel I was the one at murrays on 18 and ryan with all those ricers talking to you..I brought my car up there open headers it sounds good at idle

[csmith4153]

OK so this is what I have so far -- what else do I need to account for?

COMP Cams 07-503-8
cc503 Cam
http://store.summitracing.com/partde...8&autoview=sku
$259.95

COMP Cams 1305-16
1.6 Roller Rocker Arms at 7/16in Stud Size
http://store.summitracing.com/partde...6&autoview=sku
$285.95

PAC 1218-16
Beehive LS1 Springs
http://www.pacracing.com/Beehive_Spr...Set_of_16.html
$215.00

Whats up with links to summit racing
Comp 503
http://cs3automotive.com/index.php?a=PROD:71

Comp 1305-16
http://cs3automotive.com/index.php?a=PROD:206

[meissen]

Sweet, I looked at your site first actually but it was more expensive than Summit, now that it's lower I'll buy it from ya.

[Virtue]

you got pushrods B? but i guess if you decide to mill the heads or not will answer what you'll need

[csmith4153]

Sweet, I looked at your site first actually but it was more expensive than Summit, now that it's lower I'll buy it from ya.

Weird, I havnt changed the price on any Comp Cams products since I started my website.
When your ready, send me a pm with your "shopping list", I'll try to get you a better package price.

[meissen]

Weird, I havnt changed the price on any Comp Cams products since I started my website.
When your ready, send me a pm with your "shopping list", I'll try to get you a better package price.

Sounds like a plan to me!