Anyone know of a good shop or person in the detroit area that does exhaust work? I need a cutout welded in. Thanks
Announcement
Collapse
No announcement yet.
exhaust Work
Collapse
X
-
exhaust Work
2011 Ford Raptor SuperCrew
SVT Beadlock Wheels
Roush Intake, Corsa Exhaust
20" and 40" Light Bars
2000 Camaro Z28
Stripped Down Drag Car Build
Project 1999 Camaro Z28
2009 G8 GT Stryker Blue Metallic-SHEGONE
Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
RotoFab Intake, HSRK, Camaro Trans Pan
ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
Pat G - 93 Octane Tune
Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
CTS-V Calipers, Brembo Pads
H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband
2.55 Lingenfelter Pulley and Injectors waiting to go on!
sigpicTags: None
-
Me and Jon have had an unbeatable experience with Doug's Muffler on gratiot. Theyve done everything we have wanted so far, and unlike other shops - they dont give you any BS. when they see nice cars pull up they usually come running out past all the other beaters and wave you right in, and if not the owner will know who you are when you point to your car. they are usually excited to do the "special" work other shops freak out about. He has an awesome business going there. Theyre cheap too, i have tipped the guys every time because they let you stand under the car and everything.
I wouldve had a lot more headaches without them around. Its really run like an exhaust shop should be run, not how the law wants it run.Last edited by JoeliusZ28; May 27th, 2008, 12:52 AM.-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
-
Hmm ill hit them up tomorrow...what city are they in?2011 Ford Raptor SuperCrew
SVT Beadlock Wheels
Roush Intake, Corsa Exhaust
20" and 40" Light Bars
2000 Camaro Z28
Stripped Down Drag Car Build
Project 1999 Camaro Z28
2009 G8 GT Stryker Blue Metallic-SHEGONE
Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
RotoFab Intake, HSRK, Camaro Trans Pan
ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
Pat G - 93 Octane Tune
Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
CTS-V Calipers, Brembo Pads
H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband
2.55 Lingenfelter Pulley and Injectors waiting to go on!
sigpic
Comment
-
not sure. they are just south of where Gratiot splits into Northbound and Southbound on the northbound side by the railroad tracks.-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
oh nice! i drive by there everyday and was just thinking bout themOriginally posted by 19Xtreme99 View Postas a third option you could have "Wear Master" at 13 and Rochester do it. They did my set-up. they were cheap and fast.2011 Ford Raptor SuperCrew
SVT Beadlock Wheels
Roush Intake, Corsa Exhaust
20" and 40" Light Bars
2000 Camaro Z28
Stripped Down Drag Car Build
Project 1999 Camaro Z28
2009 G8 GT Stryker Blue Metallic-SHEGONE
Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
RotoFab Intake, HSRK, Camaro Trans Pan
ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
Pat G - 93 Octane Tune
Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
CTS-V Calipers, Brembo Pads
H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband
2.55 Lingenfelter Pulley and Injectors waiting to go on!
sigpic
Comment
-
ya just make sure you spell out exactly what you want. they are good at what they do tho. He was tellin me he has been doing custom set-ups for 30+ years and so had one of the other guys. he know's his stuff. they are all car guys obviously.Originally posted by s.reef View Postoh nice! i drive by there everyday and was just thinking bout them2000 Trans Am l 1967 Firebird
sigpic
Comment
-
There is a guy in town that claims he has been doing exhaust work for 20+ years. I went to him to redo some piping for me on my Flowmaster exhaust and he did a pretty clean job but I had to go back because one of welds had an exhaust leak. He's a total dope for claiming he has 20+ years experience.
Comment
-
InActive Member
- May 17th, 2008
- 196
- Kris
- 2001 Pontiac Trans Am WS6
- Grand Blanc, MI
- General Sales Manager
- Send PM
Depending on where you live "Doug's" is the place to go. The owner has been slinging custom exhaust for 20+ years (and thats no BS) that store has been there almost 15 yrs, and they will do exactly what you want done, no questions asked. They did 2 of my Mustangs and they both turned out really nice, had 1 issue that they rectified without any grief!!sigpic2001 Red WS6 M6 7,000 miles (just turned)
Livernois Stage 4 Heads, Fly Cut Pistons, Livernois Stage 4 Cam, Livernois 1 7/8 Headers, Ported Intake, Custom Y, Borla Muffler, Custom Dyno Tune, Ram HD Clutch, SLP Bellow, Whisper Lid, BMR Shock Tower Brace, Skip Shift elim, White Gauges, Sweet Lou's Short Throw, SLP Sub-Frame Connectors, Hotchkis Adj Panhard, Hotchkis Lower Control Arms, Carbon Fiber Drive Shaft, SLP Loop, Hoosier 315/35R17 DR's 494RWHP 434RWTQ
Comment


Comment