Welcome to the Michigan FBody Association website.
The Michigan FBody Association is a centralized website for FBody enthusiasts to discuss what's going on in the Michigan area. MiFbody.com was created to allow for an easy one-stop place to find out what's going on in Michigan as far as FBody events, to find out what clubs are available in your immediate area, and for an easy place to post classifieds for items you want to sell! Our goal was to create a more close-knit community of FBody enthusiasts in the state of Michigan, and to bring Camaro and Firebird enthusiasts alike together for some amazing FBody events!
The most important thing to know about the Michigan FBody Association is that we are NOT a club! The Michigan FBody Association is open to everyone, and is a community. Thus, we will have get togethers, casual cruises, events, and such like that, but this is not an exclusive club and it's 100% free to join this site! So what are you waiting for? Register now!
If you have any problems with the registration process or your account login, please contact us!
well i would ditch the a/f ratio one and get a real wide band if you plan on running n20. Don't be a ricer and just get gauges to get them get something that is actuly worth keeping your eyes on. again if you plan on running nitrous i would get fuel pressure.
well i would ditch the a/f ratio one and get a real wide band if you plan on running n20. Don't be a ricer and just get gauges to get them get something that is actuly worth keeping your eyes on. again if you plan on running nitrous i would get fuel pressure.
hmm im totally new to this and i dont want guages just for the sake of guages i want them to be useful, so ditch the air/fuel and go with a wideband? good to no. about the fuel pressure i was told by a friend that id need diffrent fual railings for it to work, is this thre for my 96 lt1?
its a deal for what im getting so im not worried if i need to sell the air/fuel guage
I WANT NOISE! SPEED! AN ENGINE THAT SHAKES MY INTERNAL ORGANS LIKE THEY GOT PARKINSON'S! I DONT WANT AN ENGINE THAT IS PARTIALLY POWERED BY MY LAPTOP BATTERY!
Originally posted by Z28ISGR8
WHY THE F*CK IS THERE A GOAT ON A FERRARI?
Originally posted by Darren
I think it is because I take it in and out all the time, the rubber has just stretched out, especially at the bottom where it is really thin. It annoys me more then anything.
yea the a/f ratio gauge works of your stock o2 and can tell you if its less that 14.7:1 or more thats about it. Im not shure about the fuel rail thing see if joel will chime in.
iv seen a few of those, i have a m6 if that means anything, whats the the trans temp guage tell me? lol dont wanna sound like a total idiot but new info is always good
yea the a/f ratio gauge works of your stock o2 and can tell you if its less that 14.7:1 or more thats about it. Im not shure about the fuel rail thing see if joel will chime in.
i don't know how important trans temp is on a m6 especaly for a low performance car. If you were running 9's i could see it but i don't think that would be needed
i don't know how important trans temp is on a m6 especaly for a low performance car. If you were running 9's i could see it but i don't think that would be needed
hey dont call her low performance lol ooooo ok im running 13's without spray so ya shes a dog lol
but just for my knowledge is the trans temp gauge used to tell if its getting to hot? like shut to let you know to shut her down when it gets to a certain point?
exactly. Its more usefull in a auto trans. They get alot hotter and can ruin alot more stuff if it gets hot. Friction disks start to brake down when they get hot. The worst you can do is damage sincro's i would assume if it got to hot. I dont think much more could happen.
exactly. Its more usefull in a auto trans. They get alot hotter and can ruin alot more stuff if it gets hot. Friction disks start to brake down when they get hot. The worst you can do is damage sincro's i would assume if it got to hot. I dont think much more could happen.
yea deff ditch the narrow band light show a/f gauge for the wideband, and get fuel press and keep the nitrous pressure gauge if you plan on running nitrous its always helpful to have the n02 gauge in the car instead of mounted to the bottle.
Fully Forged and built 355 LT1, Trickflow heads, 4L80E Swap, Vigilante 3400 triple disk and SFI TCI felxplate, MT ET Streets, Jet Hot LT, egr-air deleted, Hooker 3" Y, SLP 2otl, TB bypass, 160 therm, Hotchkis 1" drop springs, Hotchkis panhard bar, UMI weld in SFC, UMI Body mount torque arm w/ saftey loop, Spohn LCA's, Spohn Anti Squat brackets, KYB AGX 8 way's. Zex EFI Wet Kit 175 shot. Tuned by TJ at Baker Engineering in Nunica,MI
Ran 12.1 at 110 1.6 60 foot. Bottle ran out at the 1/8 =(
12.6 at 119 1.9 60 foot. No traction.
Comment