NHRA Legal killswitch/battery relocation??????s

[OIF1VET]

Decided I am going to make my Battery relocation NHRA legal.. Going to build a box similar to this(I will attach this to my BMR mount I already have), needs to be a hair smaller to fit in the spare tire area though.. Anyone have links to Kill switch installation/install pics? I am going with a switch, not the push/pull.... any suggestions on where the easiest place to install the switch on the TA?

http://cgi.ebay.com/ebaymotors/Batte...item4aa72567de

[kammi10]

this doesnt exactly help you but here is when i mounted mine

[OIF1VET]

this doesnt exactly help you but here is when i mounted mine

lol, you are correct....

[Lucky SOB]

Only place I can think of would be the center panel between the tail lights... maybe even the lock cylinder hole?

[OIF1VET]

Only place I can think of would be the center panel between the tail lights... maybe even the lock cylinder hole?

Not a bad idea... Will have to look into it

[01badbird]

also seen done thru license plate so new plate would cover hole if ever decide to change.also seen push/pull done this way

[OIF1VET]

also seen done thru license plate so new plate would cover hole if ever decide to change.also seen push/pull done this way

So you pull the plate at the track and mount switch. When done racing pull switch, put plate back..

[farmington]

You could do something where the switch is in the trunk with a rod and handle coming out a small hole. When you're not racing, just remove the rod and handle and all you have left is a small hole that is easy to hide.

[DETROITMUSCLE]

license plate area sounds like a great idea.

[Lucky SOB]

license plate area sounds like a great idea.

I agree! Good thinking Rick!

[wasjo6431]

Ive got mine w a push pull i mounted the switch to the Antenna bracket and the rods coming out the rear bumper
Edit: kinda similar to this
http://i226.photobucket.com/albums/d...risAvery28.jpg
http://i226.photobucket.com/albums/d...risAvery26.jpg

Edit:: Also my battery box is mounted on the passenger rear frame rail. As my fuel pumps are mounted in my trunk. but as Kammi Says "RACE CAR"

[1BADAIR]

racecarssssssssssssss

[OIF1VET]

No race cars here...

[01badbird]

kinda like this but maybe just enlarge plate bolt hole? have seen push/pull done this way to. Might have to move when you get your parachute tho.lol good luck!!
shut off resize.jpg

[OIF1VET]

Might have to move when you get your parachute tho.lol good luck!!
[ATTACH=CONFIG]32947[/ATTACH]