Announcement

Collapse
No announcement yet.

turbo 3.8

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • turbo 3.8

    I'm gonna save up for a GN engine non intercooled (that will change later). I found a guy who deals with grand nationals and had an 89 TTA and he said engine and swap for around 1500. I'm going over to talk to him again tomorrow and get an actual price on all of it. Gary you probably know him, Bruce Jones, has his own used car lot on US12 in sturgis called The Get Go, LLC. He said hes friends with Lee, the guy with all the turbo buicks on 6th avenue by the high school. I'll take some pics of what I might be getting and of his car and post em up tomorrow.

  • #2
    That will be sweet!

    Comment


    • #3
      From what I've heard, it's the biggest pain in the ass to try and fit that all into the car. There's a guy that lives around here that put a turbo 3.8 into his RS. It looks great, but it was hard work he said. Just expect to pay more than 1500, 1500 for the engine, not including misc parts and all the labor and such involved. From what I've heard, those turbo 3.8's aren't easy to come by, either.
      - Brian Meissen
      Owner, MiFBody.com
      Administrator, LTxTech.com


      1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
      2022 Camaro LT1 - "Cherry Bomb 2"
      Michigan FBody Meet & Greet Car Show 2022
      June 4th, 2022 - 9am to 3pm!!!
      The HUB Stadium, Auburn Hills, MI

      Comment


      • #4
        There's a guy in Mt. Pleasant that has one... I've been talking to him a bit lately, he has a few pics on the internet, i'll grab them here later...
        2010 Yukon Denali
        1999 Hugger Orange SS M6 - "M6 HOSS"

        Comment


        • #5
          are you thinking 4th gen or 3rd gen... they go into a 3rd gen pretty easy from what ive seen but then again so does everything else compared to the 4th gens...
          Originally posted by Frank The Tank
          Took the restrictor plate off to give the Red Dragon a little more juice. But it's not exactly street legal, so keep it on the down low.

          Comment


          • #6
            Originally posted by thursday12889
            I'm gonna save up for a GN engine non intercooled (that will change later). I found a guy who deals with grand nationals and had an 89 TTA and he said engine and swap for around 1500. I'm going over to talk to him again tomorrow and get an actual price on all of it. Gary you probably know him, Bruce Jones, has his own used car lot on US12 in sturgis called The Get Go, LLC. He said hes friends with Lee, the guy with all the turbo buicks on 6th avenue by the high school. I'll take some pics of what I might be getting and of his car and post em up tomorrow.
            Nope Don't know him.
            Western Michigan Camaro Club ~ President
            1987 Camaro IROC-Z Pearl White & Black w/ Red Pearl, 355 TPI, A4, 3:42, AirRide,"GOMARO"
            2017 Silverado Double Cab Z71 Pepperdust Metallic, 5.3, A6, 3:42, "SASYZ71"
            2005 Pontiac Grand Prix GT White, 3800
            WMCC Website www.wmcamaro.org

            "A government big enough to give you everything you want,
            is strong enough to take everything you have." — Thomas Jefferson

            "Democracy will cease to exist when you take away from those who
            are willing to work and give to those who would not."
            Thomas Jefferson

            Comment


            • #7
              Originally posted by thursday12889
              I'm gonna save up for a GN engine non intercooled (that will change later). I found a guy who deals with grand nationals and had an 89 TTA and he said engine and swap for around 1500. I'm going over to talk to him again tomorrow and get an actual price on all of it. Gary you probably know him, Bruce Jones, has his own used car lot on US12 in sturgis called The Get Go, LLC. He said hes friends with Lee, the guy with all the turbo buicks on 6th avenue by the high school. I'll take some pics of what I might be getting and of his car and post em up tomorrow.
              No, I can tell you right now that you're not. First off it's impossible to find GN motors. Your friend's friend of a friend must have bought his back in 89.

              Secondly, the TTA have MANY TTA-specific pieces. It's not ANYWHERE close to bolt-in.

              AND for whatever reason you decided you wanted to go with a hot-air GN motor, they're harder to find than the intercooled motors.

              Terrible idea.

              Build a 350 and actually get somewhere.

              SpeedDetroit Speedshop <Owner> Detroit's Only True Grassroots Speedshop
              http://gasfed.blogspot.com/
              Originally posted by KuruptWS6spd
              And yes my box is ALWAYS this clean

              Comment


              • #8
                http://members.aol.com/j007golden/91firebird.html

                This guy seems hella cool, he makes the michigan muscle videos!!

                I have tried to recruit him, will try again...
                2010 Yukon Denali
                1999 Hugger Orange SS M6 - "M6 HOSS"

                Comment


                • #9
                  No workie workie on the linkie!

                  Comment


                  • #10
                    gah yeah I was thinking 4th gen.
                    Originally posted by wezeles
                    are you thinking 4th gen or 3rd gen... they go into a 3rd gen pretty easy from what ive seen but then again so does everything else compared to the 4th gens...
                    - Brian Meissen
                    Owner, MiFBody.com
                    Administrator, LTxTech.com


                    1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
                    2022 Camaro LT1 - "Cherry Bomb 2"
                    Michigan FBody Meet & Greet Car Show 2022
                    June 4th, 2022 - 9am to 3pm!!!
                    The HUB Stadium, Auburn Hills, MI

                    Comment


                    • #11
                      Originally posted by meissen
                      gah yeah I was thinking 4th gen.

                      Yeah its an easy(er) fit in third gens, since they made third gens that came with the buick 3.8 Turbo (1989 Turbo Trans Am).

                      Had diff heads and manifolds tho.

                      Comment


                      • #12
                        Originally posted by MattODoom
                        Yeah its an easy(er) fit in third gens, since they made third gens that came with the buick 3.8 Turbo (1989 Turbo Trans Am).

                        Had diff heads and manifolds tho.
                        And a different intercooler/ALL THE PIPING/every bracket/fuel system/god damn everything.

                        It's just the same turbo and short block. Not a feasible swap.

                        SpeedDetroit Speedshop <Owner> Detroit's Only True Grassroots Speedshop
                        http://gasfed.blogspot.com/
                        Originally posted by KuruptWS6spd
                        And yes my box is ALWAYS this clean

                        Comment


                        • #13
                          Originally posted by Insomnya3AM
                          And a different intercooler/ALL THE PIPING/every bracket/fuel system/god damn everything.

                          It's just the same turbo and short block. Not a feasible swap.
                          What good hotrodder doesnt make all his own stuff anyways.

                          Comment


                          • #14
                            Originally posted by Insomnya3AM
                            No, I can tell you right now that you're not. First off it's impossible to find GN motors. Your friend's friend of a friend must have bought his back in 89.

                            Secondly, the TTA have MANY TTA-specific pieces. It's not ANYWHERE close to bolt-in.

                            AND for whatever reason you decided you wanted to go with a hot-air GN motor, they're harder to find than the intercooled motors.

                            Terrible idea.

                            Build a 350 and actually get somewhere.
                            Well actaully this guy has 2 non intercooled GRAND NATIONAL MOTORS, and three intercooled ones, along with enough parts to put together two more engines however he wants them. He just got an SG1 non intercooled Grand National motor. And he's not my freinds friend of a friend, i know this guy personally. And did I say I was gonna make it exactly like a TTA? No I didn't. He said around 1500 for a full engine AND labor. Yeah it will probably be more but not much more. How is it a terrible idea? Pontiac didn't seem to think so when the put the turbo 3.8 in the trans am in 1989. If I wanted a car with a 350 I would go out and buy one not put one in my car. But anyways I didn't get to talk to him yesterday so I'm gonna talk to him today at Street Wars and then I will take pictures and such.

                            Comment


                            • #15
                              Originally posted by thursday12889
                              Well actaully this guy has 2 non intercooled GRAND NATIONAL MOTORS, and three intercooled ones, along with enough parts to put together two more engines however he wants them. He just got an SG1 non intercooled Grand National motor. And he's not my freinds friend of a friend, i know this guy personally. And did I say I was gonna make it exactly like a TTA? No I didn't. He said around 1500 for a full engine AND labor. Yeah it will probably be more but not much more. How is it a terrible idea? Pontiac didn't seem to think so when the put the turbo 3.8 in the trans am in 1989. If I wanted a car with a 350 I would go out and buy one not put one in my car. But anyways I didn't get to talk to him yesterday so I'm gonna talk to him today at Street Wars and then I will take pictures and such.
                              You missed the point. You didn't research this enough to know what you are talking about. Done.

                              SpeedDetroit Speedshop <Owner> Detroit's Only True Grassroots Speedshop
                              http://gasfed.blogspot.com/
                              Originally posted by KuruptWS6spd
                              And yes my box is ALWAYS this clean

                              Comment

                              Working...
                              X