Welcome to the Michigan FBody Association website.
The Michigan FBody Association is a centralized website for FBody enthusiasts to discuss what's going on in the Michigan area. MiFbody.com was created to allow for an easy one-stop place to find out what's going on in Michigan as far as FBody events, to find out what clubs are available in your immediate area, and for an easy place to post classifieds for items you want to sell! Our goal was to create a more close-knit community of FBody enthusiasts in the state of Michigan, and to bring Camaro and Firebird enthusiasts alike together for some amazing FBody events!
The most important thing to know about the Michigan FBody Association is that we are NOT a club! The Michigan FBody Association is open to everyone, and is a community. Thus, we will have get togethers, casual cruises, events, and such like that, but this is not an exclusive club and it's 100% free to join this site! So what are you waiting for? Register now!
If you have any problems with the registration process or your account login, please contact us!
Is that a true Ford 9" or is it like a Currie or someother brand? I know Currie makes 'bolt in' rear ends for 1st, 2nd, & 3rd gens. Not sure about 4th. From the sounds of all the grinding it wasn't a 'bolt in' one Should be pretty BAMF.
1978 Pontiac Firebird Formula W66
350 Small Block Chevy Bored .030 Over (355) GM Performance Parts Vortec Heads Holley 650cfm Double Pumper Edelbrock Performer-Plus Cam Edelbrock Vortec Performer RPM Hedman Hedders 1-5/8" Long Tubes 2-1/2" Exhaust With "H" Pipe & Hooker Aero Chamber Mufflers TH350 With B&M Transpak Shift Kit & 2400rpm Stall B&M Tork Master Converter
it's actually a mutt 9 inch lol..... Moser 9 inch housing with a Strange Center section. basically just a 9 inch center that moser welded on the axle tubes and everything to "fit" an f-body. but i had to do a little more grinding to get the Torque Arm mount to fit.
Larry get's a cookie he was right i had to grind a crap load more to use the second set of TA mount holes because the TA hit the tunnel....anyways..... yeah i got that figured out. and then i mounted the flex line that goes from the chassis to the rear end. now i need to go buy some more brake line. because what i bought wasn't long enough. i had a perfect piece bent and everything but i need a few more inches (that's what she said hahaha JK) flamed myself before you guys could lol...... yea so time for some more stuff....update later tonight when im further along
yeah i get that a lot cause im only 19. but I work at a detail shop and we do a TON of expensive high end stuff. and we do boats as well (which pays really big) if you look under the car pictures section. i have a thread of a bunch of pics i took over a span of a few days at my work of the kinds of things i do (found the thread http://mifbody.com/vbulletin/showthread.php?t=3137). i don't have a "set amount" of what i get paid. because i get commission on whatever i do. i get paid 35 or 40%...i forget of whatever i do. now that it's spring and "boat season" (busy time) i'm making between $600 and $700 a week cash. so that's not too bad for being 19.
but the biggest part of it i would say is that
A) no girlfriend right now = HUGE SAVINGS
B) living at home = $Free.99 a month
and my only bills are
1) Cell Phone
2) Car Payment ($300 a month)
3) Food...lots of food....i have a high metabolism hahaha
that's the run down on my monetary situation for anyone that cared
shit with the hours im working right now.. i would have 3 x the cash.. TRY PAYING FOR A ****IUN WEDDING@!!!!!!!!! omfg
-Im Ron Burgundy? ----------------------------
-LT1 383 Stroker, 36 lbs SVO's, Comp Custom grind, Eagle H beam forged rotating assembly, 1.5 RR's, Hooker super comp LT's, custom straight pipes back to a pair of Thrush Turbo II's.. more to come.
Should be pretty BAMF.
he was right i had to grind a crap load more to use the second set of TA mount holes because the TA hit the tunnel....anyways..... yeah i got that figured out. and then i mounted the flex line that goes from the chassis to the rear end. now i need to go buy some more brake line. because what i bought wasn't long enough. i had a perfect piece bent and everything but i need a few more inches (that's what she said 
yeah i get that a lot cause im only 19. but I work at a detail shop and we do a TON of expensive high end stuff. and we do boats as well (which pays really big) if you look under the car pictures section. i have a thread of a bunch of pics i took over a span of a few days at my work of the kinds of things i do (found the thread http://mifbody.com/vbulletin/showthread.php?t=3137). i don't have a "set amount" of what i get paid. because i get commission on whatever i do. i get paid 35 or 40%...i forget 
of whatever i do. now that it's spring and "boat season" (busy time) i'm making between $600 and $700 a week cash. so that's not too bad for being 19.
well they're all small...but community college is cheap as hell. and my parents pay for my books, so im strait there
Tweet
Comment